Prestige 660RU-Tx Series User’s Guide

Figure 108 NAT Example 3

In this case you need to configure Address Mapping Set 1 from Menu 15.1 - Address Mapping Sets. Therefore you must choose the Full Feature option from the Network Address Translation field (in menu 4 or menu 11.3) in Figure 109.

1Enter 15 from the main menu.

2Enter 1 to configure the Address Mapping Sets.

3Enter 1 to begin configuring this new set. Enter a Set Name, choose the Edit Action and then enter 1 for the Select Rule field. Press [ENTER] to confirm.

4Select Type as One-to-One(direct mapping for packets going both ways), and enter the local Start IP as 192.168.1.10 (the IP address of FTP Server 1), the global Start IP as 10.132.50.1 (our first IGA). (See Figure 110).

5Repeat the previous step for rules 2 to 4 as outlined above.

When finished, menu 15.1.1 should look like as shown in Figure 111.

Figure 109 Example 3: Menu 11.3

Menu 11.3 - Remote Node Network Layer Options

IP Options:

Bridge Options:

IP Address Assignment= Static

Ethernet Addr Timeout (min)= 0

Rem IP Addr: 0.0.0.0

 

Rem Subnet Mask= 0.0.0.0

 

My WAN Addr= 0.0.0.0

 

NAT= Full Feature

 

Address Mapping Set= 2

 

Metric= 2

 

Private= No

 

RIP Direction= Both

 

Version= RIP-2B

 

Multicast= IGMP-v2

 

IP Policies=

 

Press ENTER to Confirm or ESC to Cancel:

The following figures show how to configure the first rule

173

Chapter 21 Network Address Translation (NAT)