Prestige
CHAPTER 10
Remote Management
Configuration
This chapter provides information on configuring remote management.
10.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which Prestige interface (if any) from which computers.
You may manage your Prestige from a remote location via:
•Internet (WAN only)
•ALL (LAN and WAN)
•LAN only,
•Neither (Disable).
To disable remote management of a service, select Disable in the corresponding Server Access field.
You may only have one remote management session running at a time. The Prestige automatically disconnects a remote management session of lower priority when another remote management session of higher priority starts. The priorities for the different types of remote management sessions are as follows.
1Telnet
2HTTP
10.1.1Remote Management Limitations
Remote management over LAN or WAN will not work when:
•A filter in SMT menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service.
•You have disabled that service in one of the remote management screens.
•The IP address in the Secured Client IP field does not match the client IP address. If it does not match, the Prestige will disconnect the session immediately.
•There is already another remote management session with an equal or higher priority running. You may only have one remote management session running at one time.
Chapter 10 Remote Management Configuration | 90 |