Prestige
Table 98 System Error Logs
LOG MESSAGE | DESCRIPTION |
|
|
%s exceeds the max. | This attempt to create a NAT session exceeds the maximum |
number of session per | number of NAT session table entries allowed to be created per |
host! | host. |
setNetBIOSFilter: calloc | The router failed to allocate memory for the NetBIOS filter settings. |
error |
|
readNetBIOSFilter: calloc | The router failed to allocate memory for the NetBIOS filter settings. |
error |
|
WAN connection is down. | A WAN connection is down. You cannot access the network |
| through this interface. |
Table 99 Packet Filter Logs
LOG MESSAGE | DESCRIPTION | |
|
| |
[ TCP UDP ICMP IGMP | Attempted access matched a configured filter rule (denoted by | |
Generic | ] packet filter | its set and rule number) and was blocked or forwarded |
matched | (set: %d, rule: %d) | according to the rule. |
LOG MESSAGE | DESCRIPTION |
|
|
Packet without a NAT table entry | The router blocked a packet that didn’t have a |
blocked: ICMP | corresponding NAT table entry. |
Router reply ICMP packet: ICMP | The router sent an ICMP reply packet to the sender. |
LOG MESSAGE | DESCRIPTION |
|
|
board %d line %d channel %d, | The router received the setup requirements for a call. “call” is |
call %d, %s C01 Outgoing Call | the reference (count) number of the call. “dev” is the device |
dev=%x ch=%x %s | type (3 is for |
| "channel" or “ch” is the call channel ID.For example,"board 0 |
| line 0 channel 0, call 3, C01 Outgoing Call dev=6 ch=0 |
| "Means the router has dialed to the PPPoE server 3 times. |
275 | Appendix G |