For example, to have your modem
Non-Volatile Memory
The Comet has memory set aside for storing user information such as frequently used phone numbers and default command settings. The latter is particularly useful when you use your modem to call a variety of different locations that require different settings. For this reason, the Comet provides a number of user “Profiles” that can be accessed through simple AT commands. This section covers the topics of storing phone numbers, and saving default settings in the
Storing Phone Numbers
The AT command to store a phone number is in the format AT&Zs=n.
The ‘s’ is a number from 0 to 3 that represents the location in memory that the phone number is to be stored, and the ‘n’ is the phone number itself.
Example: To store the number
AT&Z2=17145551212<Enter>
You can store up to 4 telephone numbers.
Dialing Stored Phone Numbers
The AT command syntax used to dial a store number is ATDSn.
The ‘n’ is the memory location of the stored number you want to dial.
Note: As a general rule, when a letter in an AT command definition is shown in italic type, the letter is not to be entered as part of the command, but rather is representative of a number or string expected as input. For example: The letter ‘S’ in the ATDS=n command is actually typed, unlike the ‘s’ in the AT&Zs=n command which represents a number.
Saving Settings and User Profiles
There are some cases where you may wish to save the settings you have made as the default settings that are recalled when the Comet is powered up. The AT&WZ command selects the current settings as the
There are four profiles that can be changed by the user, and one factory default profile. The following table lists the syntax for the command involved in storing, recalling, and viewing the profile settings.
AT&Vn
Views the settings in profile
14 Basic Modem Operation
