ZyXEL Communications NBG-419N LABEL, Apply, Apply, Reset, Reset, Channel, Channel, WPA-PSK, Security, WPA2-PSK, Selection, Operating, DESCRIPTION, No Security, No Security, Security Mode

	Chapter 12 Wireless LAN
Table 42 Network > Wireless LAN > General (continued)
LABEL	DESCRIPTION
Channel	Set the operating frequency/channel depending on your particular region.
Selection	Select a channel from the drop-down list box. The options vary depending on the frequency
	band and the country you are in.
	Refer to the Connection Wizard chapter for more information on channels. This option is
	only available if Auto Channel Selection is disabled.
Operating	This displays the channel the Router is currently using.
Channel
Security
Security Mode	Select WEP, WPA-PSKor WPA2-PSKto add security on this wireless network. The
	wireless clients which want to associate to this network must have same wireless security
	settings as the Router. After you select to use a security, additional options appears in this
	screen. See 12.4.2 and 12.4.3 sections.
	Or you can select No Security to allow any client to associate this network without
	authentication.
	Note: If you enable the WPS function, only No Security, WPA-PSKand WPA2-PSKare
	available in this field.
Apply	Click Apply to save your changes back to the Router.
Reset	Click Reset to reload the previous configuration for this screen.

See the rest of this chapter for information on the other labels in this screen.

12.4.1 No Security

Select No Security to allow wireless stations to communicate with the access points without any data encryption.

Note: If you do not enable any wireless security on your Router, your network is accessible to any wireless networking device that is within range.

Figure 74 Network > Wireless LAN > General: No Security

	105
NBG-419N v2 User’s Guide