ZyXEL Communications NBG-419N WPS, WPS, Exit, LABEL, minutes, Wireless, Security, Register, DESCRIPTION, Chapter 7 Easy Mode, information synchronization, Table 27 Wireless Security: WPS

Chapter 7 Easy Mode

7.6.7 WPS

Use this screen to add a wireless station to the network using WPS. Click WPS in the Wireless Security to open the following screen.

Figure 42 Wireless Security: WPS

The following table describes the labels in this screen.

Table 27 Wireless Security: WPS

LABEL	DESCRIPTION
Wireless	Click this to go back to the Wireless Security screen.
Security
WPS	Create a secure wireless network simply by pressing a button.
	The Router scans for a WPS-enabled device within the range and performs wireless security
	information synchronization.
	Note: After you click the WPS button on this screen, you have to press a similar button in the
	wireless station utility within 2 minutes. To add the second wireless station, you have
	to press these buttons on both device and the wireless station again after the first 2
	minutes.
Register	Create a secure wireless network simply by entering a wireless client's PIN (Personal
	Identification Number) in the Router’s interface and pushing this button.
	Type the same PIN number generated in the wireless station’s utility. Then click Register to
	associate to each other and perform the wireless security information synchronization.
Exit	Click Exit to close this screen.

60
	NBG-419N v2 User’s Guide