ZyXEL Communications NBG-419N Static Route, 18.1 Overview, 18.2 What You Can Do, IP Static Route

18

Static Route

18.1 Overview

This chapter shows you how to configure static routes for your Router.

Each remote node specifies only the network to which the gateway is directly connected, and the Router has no knowledge of the networks beyond. For instance, the Router knows about network N2 in the following figure through remote node Router 1. However, the Router is unable to route a packet to network N3 because it doesn't know that there is a route through the same remote node Router 1 (via gateway Router 2). The static routes are for you to tell the Router about the networks beyond the remote nodes.

Figure 104 Example of Static Routing Topology

18.2 What You Can Do

Use the IP Static Route screen (Section 18.3 on page 148) to view, add and delete routes.

	147
NBG-419N v2 User’s Guide