ZyXEL Communications NBG-419N 12.8 WPS Screen, SSID, Apply, Apply, Status, Status, screen, Router, Cancel, Cancel, Release, Security, WPS Setup, Enable WPS, PIN Number, 802.11 Mode

Chapter 12 Wireless LAN

12.8 WPS Screen

Use this screen to enable/disable WPS, view or generate a new PIN number and check current WPS status. To open this screen, click Network > Wireless LAN > WPS tab.

Figure 80 Network > Wireless LAN > WPS

The following table describes the labels in this screen.

Table 49 Network > Wireless LAN > WPS

LABEL	DESCRIPTION
WPS Setup
Enable WPS	Select this to enable the WPS feature.
PIN Number	This displays a PIN number last time system generated. Click Generate to generate a
	new PIN number.
Status
Status	This displays Configured when the Router has connected to a wireless network using
	WPS or when Enable WPS is selected and wireless or wireless security settings have
	been changed. The current wireless and wireless security settings also appear in the
	screen.
	This displays Unconfigured if WPS is disabled and there are no wireless or wireless
	security changes on the Router or you click Release_Configuration to remove the
	configured wireless and wireless security settings.
Release	This button is only available when the WPS status displays Configured.
Configuration	Click this button to remove all configured wireless and wireless security settings for WPS
	connections on the Router.
802.11 Mode	This is the 802.11 mode used. Only compliant WLAN devices can associate with the
	Router.
SSID	This is the name of the wireless network.
Security	This is the type of wireless security employed by the network.
Apply	Click Apply to save your changes back to the Router.
Cancel	Click Cancel to reload the previous configuration for this screen.

112
	NBG-419N v2 User’s Guide