ZyXEL Communications NBG-419N 18.3 IP Static Route Screen, No, Name, Metric, Active, Address, Netmask, Address, Gateway, Add Rule, IP Subnet, Route Name, Gateway IP, Destination

Chapter 18 Static Route

18.3 IP Static Route Screen

Click Network > Static Route to open the IP Static Route screen.Figure 105 Network > Static Route

The following table describes the labels in this screen.

Table 67 Network > Static Route

LABEL	DESCRIPTION
Static Routing Settings
Route Name	Enter a the name that describes or identifies this route.
Destination IP	Enter the IP network address of the final destination.
Address
IP Subnet	This is the subnet to which the route’s final destination belongs.
Netmask
Gateway IP	Enter the the IP address of the gateway.
Address
Metric	Assign a number to identify the route.
Add Rule	Click this to add the IP static route.
Application Rules Summary
No.	This is the number of an individual static route.
Active	The rules are always on and this is indicated by the icon.
Name	This is the name that describes or identifies this route.
Destination	This parameter specifies the IP network address of the final destination. Routing is
	always based on network number.
Gateway	This is the IP address of the gateway. The gateway is a router or switch on the
	same network segment as the device's LAN or WAN port. The gateway helps
	forward packets to their destinations.

148
	NBG-419N v2 User’s Guide