ZyXEL Communications NBG-419N 25.4 Password Screen, Apply, field, Apply, Reset, Cancel, Confirm, Retype to, System Name, Domain Name, System Setup, Old Password, New Password, Administrator

Chapter 25 Maintenance

The following table describes the labels in this screen.

Table 79 Maintenance > General

LABEL	DESCRIPTION
System Setup
System Name	System Name is a unique name to identify the Router in an Ethernet network.
Domain Name	Enter the domain name you want to give to the Router.
Administrator	Type how many minutes a management session can be left idle before the
Inactivity Timer	session times out. The default is 5 minutes. After it times out you have to log in
	with your password again. Very long idle timeouts may have security risks. A
	value of "0" means a management session never times out, no matter how long
	it has been left idle (not recommended).
Apply	Click Apply to save your changes back to the Router.
Cancel	Click Cancel to begin configuring this screen afresh.

25.4 Password Screen

It is strongly recommended that you change your Router's password.

If you forget your Router's password (or IP address), you will need to reset the device. See Section 25.8 on page 185 for details.

Click Maintenance > Password. The screen appears as shown.Figure 129 Maintenance > Password

The following table describes the labels in this screen.

Table 80 Maintenance > Password

LABEL	DESCRIPTION
Password Setup	Change your Router’s password (recommended) using the fields as shown.
Old Password	Type the default password or the existing password you use to access the system in this
	field.
New Password	Type your new system password (up to 30 characters). Note that as you type a password,
	the screen displays an asterisk (*) for each character you type.
Retype to	Type the new password again in this field.
Confirm
Apply	Click Apply to save your changes back to the Router.
Reset	Click Reset to begin configuring this screen afresh.

180
	NBG-419N v2 User’s Guide