ZyXEL Communications NBG-419N 23.4 WWW Screen, Apply, Reset, Reset, System, Router, IP Address, Server Port, Server Access, Secured Client, NBG-419Nv2 User’s Guide

Chapter 23 Remote Management

23.3.2 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds). The Router automatically logs you out if the management session remains idle for longer than this timeout period. The management session does not time out when a statistics screen is polling. You can change the timeout period in the System screen

23.4 WWW Screen

To change your Router’s remote management settings, click Management > Remote Management > WWW.

Figure 117 Management > Remote Management > WWW

The following table describes the labels in this screen

Table 77 Management > Remote Management > WWW

LABEL	DESCRIPTION
Server Port	You may change the server port number for a service if needed, however you must use the
	same port number in order to use that service for remote management.
Server Access	Select the interface(s) through which a computer may access the Router using this service.
Secured Client	Select All to allow all computes to access the Router.
IP Address	Otherwise, check Selected and specify the IP address of the computer that can access the
	Router.
Apply	Click Apply to save your customized settings and exit this screen.
Reset	Click Reset to begin configuring this screen afresh.

	169
NBG-419N v2 User’s Guide