|
| Chapter 15 Filters | |
| Table 34 Access Management > Filter (IP/MAC) (continued) | ||
| LABEL | DESCRIPTION |
|
| Direction | Apply the filter to Both, Incoming or Outgoing traffic |
|
|
| direction. |
|
|
|
|
|
| IP/MAC Filter Rule Editing |
| |
|
|
|
|
| IP/MAC Filter Rule | Select the index number of the filter rule. |
|
| Index |
|
|
|
|
|
|
| Rule Type | Select IP or MAC type to configure the rule. |
|
|
| Use the IP Filter to block traffic by IP addresses. |
|
|
| Use the MAC Filter to block traffic by MAC address. |
|
|
|
|
|
| Active | Use this field to enable or disable the rule. |
|
|
|
|
|
| Source IP Address | Enter the source IP address of the packets you wish to filter. |
|
|
| This field is ignored if it is 0.0.0.0. |
|
|
|
|
|
| Subnet Mask | Enter the IP subnet mask for the source IP address |
|
|
|
|
|
| Port Number | Enter the source port of the packets that you wish to filter. The |
|
|
| range of this field is 0 to 65535. This field is ignored if it is 0. |
|
|
|
|
|
| Destination IP Address | Enter the destination IP address of the packets you wish to |
|
|
| filter. This field is ignored if it is 0.0.0.0. |
|
|
|
|
|
| Subnet Mask | Enter the IP subnet mask for the destination IP address. |
|
|
|
|
|
| Port Number | Enter the destination port of the packets that you wish to filter. |
|
|
| The range of this field is 0 to 65535. This field is ignored if it is |
|
|
| 0. |
|
|
|
|
|
| Protocol | Select ICMP, TCP or UDP for the upper layer protocol. |
|
|
|
|
|
| MAC Address | This field is only available when you select MAC in the Rule |
|
|
| Type field. |
|
|
| Enter the MAC address of the packets you wish to filter. |
|
|
|
|
|
| Rule Unmatched | Select the action for a packet not matching the rule. |
|
|
| Select Forward to forward traffic immediately and skip |
|
|
| checking the remaining rules. Select Next to check the next |
|
|
| rule. |
|
|
|
|
|
| IP Filter Listing |
|
|
|
|
|
|
| IP Filter Set Index | Select the index number of the filter set from the |
|
|
| box. |
|
|
|
|
|
| Interface | This is the interface that the filter set applies to. |
|
|
|
|
|
| Direction | The filter set applies to this traffic direction. |
|
|
|
|
|
| # | This is the index number of the rule in a filter set. |
|
|
|
|
|
| Active | This field shows whether the rule is activated. |
|
|
|
|
|
| Src Address/Mask | This is the source IP address and subnet mask when you select |
|
|
| IP as the rule type. |
|
|
| This is the MAC address when you select MAC as the rule type. |
|
|
|
|
|
| Dest IP/Mask | This is the destination IP address and subnet mask. |
|
|
|
|
|
| Src Port | This is the source port number. |
|
|
|
|
|
| Dest Port | This is the destination port number. |
|
|
|
|
|
| 121 |
|
|