Chapter 7 Internet Setup

7.2.2 Static IP Address

In the Interface Setup > Internet screen, select Static IP Address from the ISP field to display the following screen.

Figure 23 Interface Setup > Internet (Static IP)

The following table describes the labels in this screen.

Table 13 Interface Setup > Internet (Static IP)

LABEL

DESCRIPTION

Encapsulation

Select the method of multiplexing used by your ISP from the drop-

 

down list box. Available options are: 1483 Bridged IP LLC, 1483

 

Bridged IP VC-Mux,1483 Routed IP LLC(IPoA) and 1483

 

Routed IP VC-Mux.

 

 

Static IP Address

A static IP address is a fixed IP that your ISP gives you. Type your ISP

 

assigned IP address in the field.

 

 

IP Subnet Mask

Enter a subnet mask in dotted decimal notation.

 

 

Gateway

Specify a gateway IP address (supplied by your ISP).

 

 

Bridge Interface

This field is only available when you select 1483 Bridged IP LLC or

 

1483 Bridged IP VC-Mux in the Encapsulation field.

 

Use this field to enable or disable the bridge mode. Activate the bridge

 

mode when your ISP provides you with more than one IP address and

 

you want the connected computers to get individual IP address from

 

ISP’s DHCP server directly.

 

 

NAT

Use this field to enable or disable Network Address Translation (NAT).

 

 

Default Route

Select Yes to direct traffic not listed in the routing table to the default

 

gateway. Select No to drop traffic not listed in the routing table.

 

 

 

65

P-660RU-Tx User’s Guide