Chapter 19 CWMP
19.2 The CWMP Setup Screen
Use this screen to configure your
Figure 69 Access Management > CWMP
The following table describes the fields in this screen.
Table 40 Access Management > CWMP
LINK | DESCRIPTION |
CWMP Setup |
|
|
|
CWMP | Select Activated to allow the |
| management server or select Deactivated to not allow the |
| be managed by a management server. |
|
|
Login ACS | Configure this part of the screen to log into the management server. |
|
|
URL | Type the IP address or domain name of the management server. If the P- |
| |
| will have to configure a NAT port forwarding rule on the NAT router. |
|
|
User Name | The user name is used to authenticate the |
| connection to the management server. This user name on the management |
| server and the |
| 255 printable characters found on an |
| and characters such as @#$%^&*()_+ are allowed. |
|
|
Password | The password is used to authenticate the |
| connection to the management server. This password on the management |
| server and the |
| 255 printable characters found on an |
|
|
Connection | Use this part of the screen to allow the management server to connect to |
Request | the |
|
|
Path | Type the IP address or domain name of the |
| server uses this path to verify the |
|
|
144 |
| |
| ||
|
|
|