9
Static Route
9.1 Overview
The P-660RU-Tx usually uses the default gateway to route outbound traffic from computers on the LAN to the Internet. To have the P-660RU-Tx send data to devices not reachable through the default gateway, use static routes.
For example, the next figure shows a computer (A) connected to the P-660RU-Tx’s LAN interface. The P-660RU-Tx routes most traffic from A to the Internet through the P-660RU-Tx’s default gateway (R1). You create one static route to connect to services offered by your ISP behind router R2.
Figure 31 Example of Static Routing Topology
R1
A
LANWAN
R2
9.1.1What You Can Do in the Static Route Screens
•Use the Routing Table List screen (Section 9.2 on page 86) to view static routes on the P-660RU-Tx.
•Use the Static Route screen (Section 9.2.1 on page 87) to add or edit IP static routes on the P-660RU-Tx.
| 85 |
P-660RU-Tx User’s Guide |
| |