ENGLISH
2
Introduction
Vantage Access is a web-based management tool that allows you to remotely management,
control and monitor multiple compatible devices. A compatible device is any device that supports
the TR-069, TR-098, TR-104 or TR-106 protocols. This Quick Start Guide shows you how to
install Vantage Access.
The following figure shows a network example. Once installed, you use a web browser from any
client computer (A) on the network to access the web configurator on the Vantage Access server
(B).
This guide shows you how to:
install Vantage Access.
log into Vantage Access as root for initial setup.
register and set a ZyXEL compatible device for remote management.
1 Minimum System Requirements
For the Vantage Access server:
CPU: Dual Intel Xeon 3.0 GHz
Memory: 4 GB
Hard Disk: 80 GB
Operating System: Red Hat Enterprise Linux ES 3
Others: License key - This is an authentication number that allows you to register ZyXEL devices
with the Vantage Access server. See the license key card.
For a Vantage Access client:
CPU: Compatible Intel Pentium 450 MHz
Memory: 256 MB
Hard Disk: 2 GB
Web Browser: Internet Explorer 6.0
AB
ENGLISH