Chapter 7 Wireless
Click Network Settings > Wireless to display the General screen. Select More Secure as the security level. Then select WPA or WPA2 from the Security Mode list.
Figure 28 Wireless > General: More Secure: WPA(2)
The following table describes the labels in this screen.
Table 13 Wireless > General: More Secure: WPA(2)
LABEL | DESCRIPTION |
Security Level | Select More Secure to enable |
|
|
Security Mode | Choose WPA or WPA2 from the |
|
|
Authentication Server | |
|
|
IP Address | Enter the IP address of the external authentication server in dotted |
| decimal notation. |
|
|
Port Number | Enter the port number of the external authentication server. The |
| default port number is 1812. |
| You need not change this value unless your network administrator |
| instructs you to do so with additional information. |
|
|
Shared Secret | Enter a password (up to 31 alphanumeric characters) as the key to be |
| shared between the external authentication server and the ZyXEL |
| Device. |
| The key must be the same on the external authentication server and |
| your ZyXEL Device. The key is not sent over the network. |
|
|
more.../less | Click more... to show more fields in this section. Click less to hide |
| them. |
|
|
WPA Compatible | This field is only available for WPA2. Select this if you want the ZyXEL |
| Device to support WPA and WPA2 simultaneously. |
|
|
104 |
| |
| ||
|
|
|