Chapter 14 IGMP
14.3.2 IGMP Service Add
Use this screen to add or edit an IGMP multicast service domain. Click Network Settings > IGMP Setting > IGMP Filter > Add a new rule to open the following screen.
Figure 85 Network Settings > IGMP Setting > IGMP Filter > Add a new service
The following table describes the fields in this screen.
Table 59 Network Settings > IGMP Setting > IGMP Filter > Add a new service
LABEL | DESCRIPTION |
Service Name | Specify a name to identify the IGMP service domain. You can enter up |
| to 30 characters. You can use letters, numbers, hyphens |
| underscores (_). Spaces are not allowed. |
|
|
Maximum active | Specify to how many of the service domain’s IGMP channels a LAN STB |
channels for STB | device is allowed to subscribe. |
|
|
Maximum active | Specify to how many of the service domain’s IGMP channels LAN |
channels for | devices other than STBs are is allowed to subscribe. |
| |
|
|
Group List | Use this section to specify the multicast groups and subnet masks for |
| this IGMP service domain. |
|
|
Add a group | Click this to add a multicast group and subnet mask to this IGMP |
| service domain. |
|
|
Group | This column lists the multicast groups and subnet masks for this IGMP |
| service domain. |
|
|
Modify | Click the Delete icon to delete the entry. |
|
|
Apply | Click Apply to save your changes back to the ZyXEL Device. |
|
|
Cancel | Click Cancel to exit this screen without saving. |
|
|
| 211 |
|
|