Chapter 4 Tutorials
1Click Network Settings > Broadband to open the following screen. Click Add New WAN Interface.
2In this example, the DSL connection has the following information.
General
Connection Name | MyDSLConnection |
|
|
Type | ADSL |
|
|
Connection Mode | Routing |
|
|
Encapsulation | PPPoE |
|
|
ATM PVC Configuration |
|
|
|
VPI/VCI | 36/48 |
|
|
Encapsulation Mode | |
|
|
Service Category | UBR without PCR |
|
|
Account Information |
|
|
|
PPP User Name | |
|
|
PPP Password | ABCDEF! |
|
|
PPPoE Service Name | My DSL |
|
|
Static IP Address | 192.168.1.32 |
|
|
Others | PPPoE Passthrough: Disabled |
| NAT: Enabled |
| IGMP Multicast Proxy: Enabled |
| Apply as Default Gateway: Enabled |
|
|
3Select the Active check box. Enter the General and ATM PVC Configuration settings as provided above.
Set the Type to ADSL.
Choose the Encapsulation specified by your DSL service provider. For this example, the service provider requires a username and password to establish Internet connection. Therefore, select PPPoE as the WAN encapsulation type.
4Enter the account information provided to you by your DSL service provider.
46 |
| |
| ||
|
|
|