Chapter 4 Tutorials
Note: QoS is applied to traffic flowing out of the ZyXEL Device.
Traffic that does not match this class is assigned a priority queue based on the internal QoS mapping table on the ZyXEL Device.
|
|
|
| DSL | |
|
|
|
| ||
|
|
|
| 10,000 kbps | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Your computer |
|
|
|
| |
IP=192.168.1.23 |
|
|
| ||
and/or |
|
|
| ||
MAC=AA:FF:AA:FF:AA:FF | A colleague’s computer | ||||
Email traffic: Highest priority | |||||
|
|
| Other traffic: Automatic classifier | ||
1Click Network Settings > QoS > General and select Active. Set your WAN Managed Upstream Bandwidth to 10,000 kbps (or leave this blank to have the ZyXEL Device automatically determine this figure). Click Apply.
2Click Queue Setup > Add new Queue to create a new queue. In the screen that opens, check Active and enter or select the following values:
•Name:
•To Interface: WAN
•Priority: 1 (High)
•Weight: 8
| 65 |
|
|