Chapter 15 Interface Group
15.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Group screen to open the following screen. Use this screen to create a new interface group.
Note: An interface can belong to only one group at a time.
Figure 91 Interface Group Configuration
The following table describes the fields in this screen.
Table 64 Interface Group Configuration
LABEL | DESCRIPTION |
Group Name | Enter a name to identify this group. You can enter up to 30 characters. |
| You can use letters, numbers, hyphens |
| Spaces are not allowed. |
|
|
WAN Interface | Select the WAN interface this group uses. |
used in the | Select No Interface/None to not add a WAN interface to this group. |
grouping | |
|
|
Grouped LAN | Select one or more LAN interfaces (Ethernet LAN, HPNA or wireless |
Interfaces | LAN) in the Available LAN Interfaces list and use the left arrow to |
Available LAN | move them to the Grouped LAN Interfaces list to add the interfaces |
to this group. | |
Interfaces | To remove a LAN or wireless LAN interface from the Grouped LAN |
| |
| Interfaces, use the |
|
|
| 217 |
|
|