|
| Chapter 7 Wireless |
| Table 9 Network Settings > Wireless > General | |
| LABEL | DESCRIPTION |
| MBSSID/LAN | Select this to keep the wireless clients in this SSID from communicating |
| Isolation | with clients in other SSIDs or wired LAN devices through the ZyXEL |
|
| Device. |
|
| Select both Client Isolation and MBSSID/LAN Isolation to allow this |
|
| SSID’s wireless clients to only connect to the Internet through the ZyXEL |
|
| Device. |
|
|
|
| Enhanced | Select this check box to allow the ZyXEL Device to convert wireless |
| Multicast | multicast traffic into wireless unicast traffic. |
| Forwarding |
|
|
|
|
| Security Level |
|
|
|
|
| Security | Select Basic (WEP) or More Secure |
| Mode | security on this wireless network. The wireless clients which want to |
|
| associate to this network must have same wireless security settings as the |
|
| ZyXEL Device. When you select to use a security, additional options |
|
| appears in this screen. |
|
| Or you can select No Security to allow any client to associate this |
|
| network without any data encryption or authentication. |
|
| See the following sections for more details about this field. |
|
|
|
| Apply | Click Apply to save your changes. |
|
|
|
| Cancel | Click Cancel to restore your previously saved settings. |
|
|
|
7.2.1 No Security
Select No Security to allow wireless stations to communicate with the access points without any data encryption or authentication.
Note: If you do not enable any wireless security on your ZyXEL Device, your network is accessible to any wireless networking device that is within range.
Figure 25 Wireless > General: No Security
| 99 |
|
|