Chapter 11 LAN
Table 42 Network > LAN > IP
LABEL | DESCRIPTION | |
Gateway IP | Enter a gateway IP address (if your ISP or network administrator gave | |
Address | you one) in this field. | |
|
| |
DNS Assignment |
| |
|
| |
First DNS Server | Select From ISP if your ISP or router to which the WAP3205 connects | |
Second DNS | dynamically assigns DNS server information (and the WAP3205's WAN | |
IP address). The field to the right displays the | ||
Server | ||
IP address that the ISP assigns. | ||
| ||
| Select | |
| the DNS server's IP address in the field to the right. | |
| Select None if you do not want to configure DNS servers. If you do not | |
| configure a DNS server, you must know the IP address of a computer | |
| in order to access it. | |
|
| |
Apply | Click Apply to save your changes back to the WAP3205. | |
|
| |
Reset | Click Reset to begin configuring this screen afresh. | |
|
|
11.5 IP Alias Screen
Use this screen to have the WAP3205 apply IP alias to create LAN subnets. Click LAN > IP Alias.
Figure 65 Network > LAN > IP Alias
The following table describes the labels in this screen.
Table 43 Network > LAN > IP Alias
LABEL | DESCRIPTION |
IP Alias | Check this to enable IP alias. |
|
|
IP Address | Type the IP alias address of your WAP3205 in dotted decimal notation. |
|
|
IP Subnet Mask | The subnet mask specifies the network number portion of an IP |
| address. Your WAP3205 will automatically calculate the subnet mask |
| based on the IP address that you assign. Unless you are implementing |
| subnetting, use the subnet mask computed by the WAP3205. |
|
|
Apply | Click Apply to save your changes back to the WAP3205. |
|
|
Reset | Click Reset to begin configuring this screen afresh. |
|
|
104 |
| |
WAP3205 User’s Guide |
| |
|
|
|