| Chapter 8 Universal Repeater Mode |
Table 26 Status Screen: Universal Repeater Mode | |
LABEL | DESCRIPTION |
Rate | For the LAN ports, this displays the port speed or N/A when the line is |
| disconnected. |
| For the WLAN, it displays the maximum transmission rate when the WLAN |
| is enabled and N/A when the WLAN is disabled. |
|
|
System Status |
|
|
|
Item | This column shows the type of data the WAP3205 is recording. |
|
|
Data | This column shows the actual data recorded by the WAP3205. |
|
|
System Up Time | This is the total time the WAP3205 has been on. |
|
|
Current Date/Time | This field displays your WAP3205’s present date and time. |
|
|
System Resource |
|
|
|
CPU Usage | This displays what percentage of the WAP3205’s processing ability is |
| currently used. When this percentage is close to 100%, the WAP3205 is |
| running at full load, and the throughput is not going to improve anymore. |
| If you want some applications to have more throughput, you should turn |
| off other applications (for example, using bandwidth management. |
|
|
Memory Usage | This shows what percentage of the heap memory the WAP3205 is using. |
|
|
System Setting |
|
|
|
Configuration Mode | This shows the web configurator mode you are viewing - Expert. |
|
|
Summary |
|
|
|
Packet Statistics | Click Details... to go to the Monitor > Packet Statistics screen |
| (Section 3.4 on page 30). Use this screen to view port status and packet |
| specific statistics. |
|
|
WLAN Station Status | Click Details... to go to the Monitor > WLAN Station Status screen |
| (Section 3.5 on page 32). Use this screen to view the wireless stations |
| that are currently associated to the WAP3205. |
|
|
8.5 Universal Repeater Screen
Use this screen to enter the SSID and select the wireless security mode used by the wireless device to which you want to connect. Go to Configuration > Wireless LAN > Universal Repeater to open the Universal Repeater screen. The screen varies depending on security mode.
| 69 |
WAP3205 User’s Guide | |
|
|