Chapter 12 Maintenance
Click Maintenance > Firmware Upgrade. Follow the instructions in this screen to upload firmware to your WAP3205.
Figure 69 Maintenance > Firmware Upgrade
The following table describes the labels in this screen.
Table 47 Maintenance > Firmware Upgrade
LABEL | DESCRIPTION |
File Path | Type in the location of the file you want to upload in this field or click |
| Browse... to find it. |
|
|
Browse... | Click Browse... to find the .bin file you want to upload. Remember that |
| you must decompress compressed (.zip) files before you can upload them. |
|
|
Upload | Click Upload to begin the upload process. This process may take up to |
| two minutes. |
|
|
Note: Do not turn off the WAP3205 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into the WAP3205 again.
The WAP3205 automatically restarts in this time causing a temporary network disconnect. In some operating systems, you may see the following icon on your desktop.
Figure 70 Network Temporarily Disconnected
After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, an error message appears. Click Return to go back to the Firmware Upgrade screen.
112 |
| |
WAP3205 User’s Guide |
| |
|
|
|