Chapter 7 Client Mode
7.5.2 Site Survey Screen
Use this screen to scan for and connect to a wireless network automatically. Go to Configuration > Wireless LAN > Site Survey to open the following screen.
Figure 32 Client Mode: WLAN > Site Survey
The following table describes the labels in this screen.
Table 24 Client Mode: WLAN > Site Survey
LABEL | DESCRIPTION |
Station Site Survey | |
|
|
# | Select a wireless device and click Add Profile to open a configuration |
| screen where you can add the selected wireless device to a profile and |
| then enable it. |
|
|
SSID | This displays the SSID of the wireless device. |
| indicates the wireless device is added to an activated profile and the |
| WAP3205 is connecting to it. |
|
|
BSSID | This displays the MAC address of the wireless device. |
|
|
Signal | This displays the strength of the wireless signal. The signal strength |
Strength | mainly depends on the antenna output power and the distance between |
| your WAP3205 and this device. |
|
|
Channel | This displays the channel number used by this wireless device. |
|
|
Encryption | This displays the data encryption method used by this wireless device. |
|
|
Authentication | This displays the authentication method used by this wireless device. |
|
|
Network Type | This displays the network type (Infrastructure or Ad Hoc) of this |
| wireless device. |
|
|
Rescan | Click this button to search for available wireless devices within |
| transmission range and update this table. |
|
|
Add Profile | Select a wireless device and click this button to add it to a profile. |
|
|
62 |
| |
WAP3205 User’s Guide |
| |
|
|
|