Chapter 3 Monitor
packet specific statistics and the "system up time". The Poll Interval(s) field is configurable and is used for refreshing the screen.
Figure 9 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 8 Summary: Packet Statistics
LABEL | DESCRIPTION |
Port | This is the WAP3205’s port type. |
|
|
Status | For the LAN ports, this displays the port speed or Down when the line |
| is disconnected. |
| For the WLAN, it displays the maximum transmission rate when the |
| WLAN is enabled and Down when the WLAN is disabled. |
|
|
TxPkts | This is the number of transmitted packets on this port. |
|
|
RxPkts | This is the number of received packets on this port. |
|
|
Collisions | This is the number of collisions on this port. |
|
|
Tx B/s | This displays the transmission speed in bytes per second on this port. |
|
|
Rx B/s | This displays the reception speed in bytes per second on this port. |
|
|
Up Time | This is the total time the WAP3205 has been for each session. |
|
|
System Up Time | This is the total time the WAP3205 has been on. |
|
|
Poll Interval(s) | Enter the time interval in seconds for refreshing statistics in this field. |
|
|
Set Interval | Click this button to apply the new poll interval you entered in the Poll |
| Interval(s) field. |
|
|
Stop | Click Stop to stop refreshing statistics. |
|
|
| 31 |
WAP3205 User’s Guide | |
|
|