Chapter 9 Tutorials

9.4Enabling and Configuring Wireless Security (No WPS)

This example shows you how to configure wireless security settings with the following parameters on your WAP3205.

SSIDSSID_Example3

Channel Auto

Security WPA-PSK

(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)

Follow the steps below to configure the wireless settings on your WAP3205.

The instructions require that your hardware is connected (see the Quick Start Guide) and you are logged into the Web Configurator through your LAN connection (see Section 2.2 on page 23).

1Open the Wireless LAN > General screen in the AP’s Web Configurator.

2Enter SSID_Example3 as the SSID and select a channel or select Auto Channel Selection to have the WAP3205 scans for and select an available channel automatically. Click Apply.

Figure 43 Tutorial: Network > Wireless LAN > General

3Click the Security tab.

 

77

WAP3205 User’s Guide