Chapter 2 Introducing the Web Configurator

The following table describes the labels in this screen.

Table 5

Change Weather

LABEL

 

DESCRIPTION

oC or oF

 

Choose which temperature unit you want the WAP3205 to

 

 

display.

 

 

 

Change

 

Select the location for which you want to know the weather. If

Location

 

the city you want is not listed, choose one that is closest to it.

 

 

 

Finish

 

Click this to apply the settings and refresh the date and time display.

 

 

 

2.2.3.2 Time/Date Edit

One timezone can cover more than one country. You can choose a particular country in which the WAP3205 is located and have the WAP3205 display and use the current time and date for its logs.

Click the icon to change the Weather display.

Figure 7 Change Password Screen

The following table describes the labels in this screen.

Table 6 Change Password Screen

LABEL

DESCRIPTION

Change time

Select the specific country whose current time and date you

zone

want the WAP3205 to display.

 

 

Finish

Click this to apply the settings and refresh the weather display.

 

 

Note: You can also edit the timezone in Section 12.5 on page 109.

2.3 Resetting the WAP3205

If you forget your password or IP address, or you cannot access the Web Configurator, you will need to use the RESET button at the back of the WAP3205 to reload the factory-default configuration file. This means that you will lose all configurations that you had previously saved, the password will be reset to “1234” and the IP address will be reset to “192.168.1.2”.

 

27

WAP3205 User’s Guide