ZyXEL Communications wireless n300 range extendor manual 28

Chapter 5 Tutorials

5.2.2 PIN Configuration

When you use the PIN configuration method, you need to use both WRE2205’s configuration interface and the client’s utilities.

1Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method to get a PIN number.

2On the WRE2205, navigate to the Network > Wireless LAN > WPS Station screen.

3In the WRE2205’s Web Configurator, select Registrar in Config Mode.

4In the WRE2205’s Web Configurator, enter the PIN number in the Input client PIN code.

5Click the Start buttons (or the buttons next to the PIN fields) on both the wireless client utility screen and the WRE2205’s WPS Station screen within about one minute, then wait two minutes for the WPS configuration to complete.

The WRE2205 authenticates the wireless client and sends the proper configuration settings to the wireless client. Then the wireless client is able to communicate with the WRE2205 securely.

The following figure shows an example of how to set up wireless network and security on WRE2205 and wireless client (ex. NWD210N in this example) by using PIN method.

28
	WRE2205 User’s Guide