|
| Chapter 6 Wireless LAN |
|
|
|
| Table 14 Network > Wireless LAN > Advanced (continued) | |
| LABEL | DESCRIPTION |
| Preamble Type | A preamble affects the timing in your wireless network. There are two preamble modes: |
|
| long and short. If a device uses a different preamble mode than the WRE2205 does, it |
|
| cannot communicate with the WRE2205. |
|
|
|
| Tx Power | This field controls the transmission power of the WRE2205. When using the WRE2205 |
|
| with a notebook computer, select a lower transmission power level when you are close to |
|
| the AP in order to conserve battery power. |
|
|
|
| Apply | Click Apply to save your changes to the WRE2205. |
|
|
|
| Reset | Click Reset to reload the previous configuration for this screen. |
|
|
|
6.7 Quality of Service (QoS) Screen
Use the QoS screen to enable Wifi MultiMedia Quality of Service (WMM QoS). WMM QoS prioritizes traffic using
Click Network > Wireless LAN > QoS. The following screen appears.
Figure 31 Network > Wireless LAN > QoS
The following table describes the labels in this screen.
Table 15 Network > Wireless LAN > QoS
LABEL | DESCRIPTION |
WMM QoS Policy | Enable this to have the WRE2205 automatically give a service a priority level |
| according to the ToS value in the IP header of packets it sends. WMM QoS (Wifi |
| MultiMedia Quality of Service) gives high priority to voice and video, which makes |
| them run more smoothly. |
|
|
Apply | Click Apply to save your changes to the WRE2205. |
|
|
6.8 WPS Screen
Use this screen to enable/disable WPS, view or generate a new PIN and check current WPS status. To open this screen, click Network > Wireless LAN > WPS tab.
| 43 |
WRE2205 User’s Guide | |
|
|