Chapter 6 Wireless LAN
Figure 34 Network > Wireless LAN > AP Select
The following table describes the labels in this screen.
Table 18 Network > Wireless LAN > AP Select
LABEL | DESCRIPTION |
Select | Use the radio button to select the wireless device to which you want to connect. |
|
|
SSID | This displays the Service Set IDentity of the wireless device. The SSID is a unique name |
| that identifies a wireless network. All devices in a wireless network must use the same |
| SSID. |
|
|
MAC | This displays the MAC address of the wireless device. |
|
|
Channel | This displays the channel number used by this wireless device. |
|
|
Mode | This displays which IEEE 802.11b/g/n wireless networking standards the wireless device |
| supports. |
|
|
Security Mode | This displays the type of security configured on the wireless device. When no is shown, no |
| security is configured and you can connect to it without a password. |
|
|
Strength | This displays the strength of the wireless signal. The signal strength mainly depends on |
| the antenna output power and the distance between your WRE2205 and this device. |
|
|
Setup repeater | Select this to setup the AP manually. |
manually |
|
|
|
SSID | If Setup repeater manually is selected, use this field to type the SSID of the AP. This is |
| useful when the AP’s SSID is hidden. |
|
|
Refresh | Click this to search for available wireless devices within transmission range and update |
| this table. |
|
|
Previous | Click this to see the previous page of APs. |
|
|
Next | Click this to see the next page of APs. |
|
|
Apply | Click this to start the next step in the AP setup process. |
|
|
46 |
|
WRE2205 User’s Guide | |
|
|