Chapter 6 Wireless LAN
Figure 32 Network > Wireless LAN > WPS
The following table describes the labels in this screen.
Table 16 Network > Wireless LAN > WPS
LABEL | DESCRIPTION |
WPS Setup |
|
|
|
Enable WPS | Select this to enable the WPS feature. |
|
|
PIN Number | This displays a PIN number last time system generated. Click Generate to generate a |
| new PIN number. |
|
|
WPS Status |
|
|
|
Status | This displays Configured when the WRE2205 has connected to a wireless network using |
| WPS or when Enable WPS is selected and wireless or wireless security settings have |
| been changed. The current wireless and wireless security settings also appear in the |
| screen. |
| This displays Unconfigured if WPS is disabled and there are no wireless or wireless |
| security changes on the WRE2205 or you click Release_Configuration to remove the |
| configured wireless and wireless security settings. |
|
|
Release | This button is only available when the WPS status displays Configured. |
Configuration | Click this button to remove all configured wireless and wireless security settings for WPS |
| |
| connections on the WRE2205. |
|
|
Apply | Click Apply to save your changes back to the WRE2205. |
|
|
Refresh | Click Refresh to get this screen information afresh. |
|
|
6.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS.
Note: WPS can only be configured between two devices at a time. For example if devices A and B are first configured using WPS, then use either A or B to configure device C using WPS.
To open this screen, click Network > Wireless LAN > WPS Station tab.
44 |
|
WRE2205 User’s Guide | |
|
|