10

Troubleshooting

This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into the following categories.

•Power, Hardware Connections, and LEDs

•WRE2205 Access and Login

•Internet Access

•Resetting the WRE2205 to Its Factory Defaults

•Wireless Problems

10.1Power, Hardware Connections, and LEDs

The WRE2205 does not turn on. None of the LEDs turn on.

1Make sure you are using the power adaptor or cord included with the WRE2205.

2Make sure the power adaptor or cord is connected to the WRE2205 and plugged in to an appropriate power source. Make sure the power source is turned on.

3Disconnect and re-connect the power adaptor or cord to the WRE2205.

4If the problem continues, contact the vendor.

One of the LEDs does not behave as expected.

1Make sure you understand the normal behavior of the LED. See Section 1.3 on page 10.

2Make sure you understand how the LEDs are enabled or disabled. See Section 9.6 on page 54.

3Check the hardware connections. See the Quick Start Guide.

4Inspect your cables for damage. Contact the vendor to replace any damaged cables.

5Disconnect and re-connect the power adaptor to the WRE2205.

6If the problem continues, contact the vendor.

 

56

WRE2205 User’s Guide