ZyXEL Communications wireless n300 range extendor 9.5 Restart Screen, 9.6 LED Screen

Chapter 9 Tools

Figure 42 Temporarily Disconnected

If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default WRE2205 IP address (192.168.1.2). Refer to your operating system’s help files for details on how to set up your computer’s IP address.

9.4.3 Back to Factory Defaults

Pressing the Reset button on the Maintenance > Tools > Configuration screen clears all user- entered configuration information and returns the WRE2205 to its factory defaults.

You can also press the WPS button on the front panel for more than 10 seconds to reset the factory defaults of your WRE2205. Refer to Section 2.3 on page 14 for more information on the resetting the WRE2205.

9.5 Restart Screen

System restart allows you to reboot the WRE2205 without turning the power off.

Click Maintenance > Tools > Restart. Click Restart to have the WRE2205 reboot. This does not affect the WRE2205's configuration.

Figure 43 Maintenance > Tools > Restart

9.6 LED Screen

Click Maintenance > Tools > LED. Use this screen to configure which LEDs are enabled or disabled.

Figure 44 Maintenance > Tools > LED

54
	WRE2205 User’s Guide