Chapter 18 SNMP
The following table describes the labels in this screen.
Table 42 SNMP Group: Create
LABEL | DESCRIPTION |
Group Name | Specify the name for this SNMP group. You can use |
| Spaces are allowed. |
|
|
SNMP Version | Specify the SNMP version this group uses to manage the switch. |
|
|
Authentication | This field is only editable if you select SNMPv3 in the SNMP Version field. Select |
| Enabled to force SNMP v3 groups to authenticate with the switch or select Disabled |
| to deactivate authentication for the SNMP v3 groups. For SNMP v1 and SNMP v2c |
| authentication is always disabled. |
|
|
Access | Read - select Enabled to allow this group to collect information from this switch. |
| Write - select Enabled to allow this group to create or edit MIBs. |
|
|
Create | Click this to add this SNMP group to the switch. |
| Note: A maximum of ten groups can be created on the switch. |
|
|
Cancel | Click this to go back to the main SNMP Group screen without saving your changes. |
18.2.2 SNMP Group: Modify
Click on the Group ID number or select a Group ID from the Group ID drop down list box in the SNMP Group screen to modify the settings of an existing group.
Figure 61 SNMP Group: Modify
The following table describes the labels in this screen.
Table 43 SNMP Group: Modify
LABEL | DESCRIPTION |
Group ID | This field indicates which group you are modifying. |
| Click on Remove This Group to delete this group configuration from the switch. |
| Click on Display All Group to view the main SNMP Group screen. |
|
|
Group Name | Edit the name for this SNMP group. |
|
|
SNMP Version | Specify the SNMP version this group uses to manage the switch. |
|
|
Authentication | This field is only editable if you select SNMPv3 in the SNMP Version field. Select |
| Enabled to force SNMP v3 groups to authenticate with the switch or select Disabled |
| to deactivate authentication for the SNMP v3 groups. For SNMP v1 and SNMP v2c |
| authentication is always disabled. |
|
|
| 109 |
|
|