Chapter 5 System
Table 5 System | (continued) | |
LABEL |
| DESCRIPTION |
Backup settings |
| Click this link to create and save a backup configuration file. See Section 5.1.3 on |
|
| |
|
|
|
Restore |
| Click this link to upload an existing configuration file to the switch. See Section 5.1.4 |
settings |
| |
|
|
|
5.1.1 Configure IP Address
Use the Configure IP Address screen to set up the IP address manually. The following screen appears when you click the existing IP address in the System > Status screen.
Figure 20 Configure IP Address
The following table describes the labels in this screen.
Table 6 Configure IP Address
LABEL | DESCRIPTION |
IP Address | Enter the IP address of your switch in dotted decimal notation. |
| For example, 192.168.1.1. |
|
|
Network Submask | Enter the IP subnet mask of your switch in dotted decimal |
| notation for example 255.255.255.0. |
|
|
Gateway | Enter the IP address of the default outgoing gateway in dotted |
| decimal notation, for example 192.168.1.5. |
|
|
5.1.2 Layer 2 (L2) Table Aging
L2 Table Aging defines the aging time of the Address Resolution Logic (ARL) table. This table learns and remembers MAC addresses of devices sending information through it. See Chapter 13 on page 83 for more background information. Click the link in the L2 Table Aging field to see the screen as shown next.
Figure 21 Configure L2 Table Aging
50 |
| |
| ||
|
|
|