Chapter 12 Port Rate Limit and Storm Control
The following table describes the related labels in this screen.
Table 22 Rate Limit and Storm Control
LABEL | DESCRIPTION |
Port | This field displays the port number. Click on an individual port number to configure rate |
| limits on that port. |
|
|
Ingress Rate | Displays the maximum bandwidth allowed in kilobits per second (Kbps) for the |
| incoming traffic flow on a port. |
|
|
Egress Rate | Displays the maximum bandwidth allowed in kilobits per second (Kbps) for the out- |
| going traffic flow on a port. |
|
|
12.1.1 Rate Limit Screen
Click a port number in the Port Rate screen to bring up the screen as shown next.
Figure 43 Rate Limit Configuration
The following table describes the related labels in this screen.
Table 23 Rate Limit Configuration
LABEL | DESCRIPTION |
Ingress Rate | Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming |
| traffic flow on a port. |
|
|
Egress Traffic | Select Disabled to not have any bandwidth limits for outgoing traffic on the port or |
Shaping | select Enabled to enable bandwidth limits for outgoing traffic on the port. |
|
|
Rate | This is a read only field indicating the rate limit of outgoing traffic on the port in Kbps. |
| This value changes depending on the number of Tokens Added Per Interval. |
|
|
80 |
| |
| ||
|
|
|