Chapter 8 VLAN
8.2.2 Create IEEE 802.1Q VLAN Screen
See Section 8.1 on page 63 for more information on VLANs. Click VLAN in the navigation panel to display the IEEE 802.1Q VLAN screen as shown next.
Figure 32 VLAN: Create VLAN
The following table describes the labels in this screen.
Table 13 VLAN: Create VLAN
LABEL | DESCRIPTION |
New VLAN ID | Enter the VLAN ID of the VLAN you want to create. |
|
|
ALL | This button allows you to configure all the ports at once. Click this button to change |
| the state of all the ports at once. The possible states are: |
| empty - This indicates that the port is not part of the VLAN. |
| T - This indicates that this port is a member of the VLAN. When the packet leaves |
| the member port, the VLAN tag is added. |
| U - This indicates that this port is a member of the VLAN. When the packet leaves |
| the member port, the VLAN tag is removed. |
|
|
1...52 | These buttons allow you to specify whether the individual ports are members of this |
| VLAN. Click the buttons below the numbers to change the state of the ports. The |
| possible states are: |
| empty - This indicates that the port is not part of the VLAN. |
| T - This indicates that this port is a member of the VLAN. When the packet leaves |
| the member port, the VLAN tag is added. |
| U - This indicates that this port is a member of the VLAN. When the packet leaves |
| the member port, the VLAN tag is removed. |
|
|
Create | Click Create to add this VLAN to the switch. |
|
|
Cancel | Click Cancel to return to the VLAN status screen without making any changes. |
|
|
8.2.3 Edit IEEE 802.1Q VLAN Screen
See Section 8.1 on page 63 for more information on VLANs. Click VLAN in the navigation panel to display the IEEE 802.1Q VLAN screen as shown next.
| 65 |
|
|