Husqvarna 240e, 235e General rules, Cutting equipment designed to reduce kickback, Bar, Chain

Page 11

GENERAL SAFETY PRECAUTIONS

General rules

•Only use cutting equipment recommended by us! See instructions under the heading Technical data.

•Keep the chain’s cutting teeth properly sharpened! Follow our instructions and use the recommended file gauge. A damaged or badly sharpened chain increases the risk of accidents.

•Maintain the correct depth gauge setting! Follow our instructions and use the recommended depth gauge clearance. Too large a clearance increases the risk of kickback.

•Keep the chain properly tensioned! If the chain is slack it is more likely to jump off and lead to increased wear on the bar, chain and drive sprocket.

•Keep cutting equipment well lubricated and properly maintained! A poorly lubricated chain is more likely to break and lead to increased wear on the bar, chain and drive sprocket.

Cutting equipment designed to reduce kickback

WARNING! Faulty cutting equipment or

! the wrong combination of bar and saw chain increases the risk of kickback! Only use the bar/saw chain combin- ations we recommend, and follow the filing instructions. See instructions under the heading Technical data.

The only way to avoid kickback is to make sure that the kickback zone of the bar never touches anything.

By using cutting equipment with ”built-in” kickback reduction and keeping the chain sharp and well- maintained you can reduce the effects of kickback.

Bar

The smaller the tip radius the lower the chance of kickback.

Chain

A chain is made up of a number of links, which are available in standard and low-kickback versions.

IMPORTANT! No saw chain design eliminates the danger of kickback.

WARNING! Any contact with a rotating

! saw chain can cause extremely serious injuries.

Some terms that describe the bar and chain

To maintain the safety features of the cutting equipment, you should replace a worn or damaged bar or chain with a bar and chain combinations recommended by Husqvarna. See instructions under the heading Technical Data for a list of replacement bar and chain combinations we recommend.

Bar

•Length (inches/cm)

•Number of teeth on bar tip sprocket (T).

•Chain pitch (inches). The spacing between the drive links of the chain must match the spacing of the teeth on the bar tip sprocket and drive sprocket.

•Number of drive links. The number of drive links is determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

•Bar groove width (inches/mm). The groove in the bar must match the width of the chain drive links.

•Chain oil hole and hole for chain tensioner.The bar must be matched to the chain saw design.

Chain

•Chain pitch (inches)

•Drive link width (mm/inches)

•Number of drive links.

Sharpening your chain and adjusting depth gauge setting

WARNING! Always wear gloves, when

! working with the chain, in order to protect your hands from injury.

General information on sharpening cutting teeth

•Never use a blunt chain. When the chain is blunt you have to exert more pressure to force the bar through the wood and the chips will be very small. If the chain is very blunt it will produce wood powder and no chips or shavings.

•A sharp chain eats its way through the wood and produces long, thick chips or shavings.

•The cutting part of the chain is called the cutter and consists of a cutting tooth (A) and the depth gauge (B). The cutters cutting depth is determined by the difference in height between the two (depth gauge setting). (7)

When you sharpen a cutting tooth there are four important factors to remember.

1Filing angle

2 Cutting angle

3 File position

4 Round file diameter

It is very difficult to sharpen a chain correctly without the right equipment. We recommend that you use our file gauge. This will help you obtain the maximum kickback reduction and cutting performance from your chain. See instructions under the heading Technical data for information about sharpening your chain.

WARNING! Departure from the

! sharpening instructions considerably

increases the risk of kickback.

Sharpening cutting teeth

To sharpen cutting teeth you will need a round file and a file gauge. See instructions under the heading Technical data for information on the size of file and gauge that are recommended for the chain fitted to your chain saw.

•Check that the chain is correctly tensioned. A slack chain will move sideways, making it more difficult to sharpen correctly.

•Always file cutting teeth from the inside face. Reduce the pressure on the return stroke. File all the teeth on one side first, then turn the chain saw and file the teeth on the other side.

5451676-63 Rev.1 2008-04-14

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 235e 240e 5451676-63 Rev.1 OFF Half Full 49 a Retreat path Dear customer Symbols on the machineThank you for using a Husqvarna product IntroductionWhat is what on the chain saw? Contents For Canada General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentAlways use common sense Personal protective equipmentCutting equipment Bar Sharpening your chain and adjusting depth gauge settingGeneral rules Cutting equipment designed to reduce kickbackLubricating cutting equipment Tensioning the chainChain drive sprocket General Safety Precautions / AssemblyHappen when the chain touches the operator Fitting the bar and chainFueling Fuel safetyFuel Handling FuelStarting and stopping Fuel Handling / Starting and StoppingGeneral working instructions Basic safety rulesWorking Techniques Before useTree felling technique Basic cutting techniqueFreeing a tree that has fallen badly General Working Techniques / MaintenanceHow to avoid kickback Carburetor adjustmentSpark plug MaintenanceMuffler Air filterDaily maintenance Every 5-10 h Maintenance scheduleTechnical data Technical DataBar Chain Recommended cutting equipment for CanadaYour Warranty Rights and Obligations Federal Emission Control Warranty StatementOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautionsNous vous remercions dutiliser un produit Husqvarna Symboles sur la machineCher client Consignes de sécurité pour les utilisateurs de Quels sont les composants de la tronçonneuse?Sommaire Mesures à prendre avant de mettre en usage uneInstructions Générales DE Sécurité AVERTISSEMENT! La plupart des Utilisez toujours votre bon sensÉquipement de sécurité de la machine Frein de chaîne avec arceau protecteurSystème anti-vibrations Blocage de l’accélérationCapteur de chaîne Protection de la main droiteAffûtage et réglage de l’épaisseur du copeau de la chaîne Équipement de coupeRègles élémentaires Équipement de coupe anti-rebondLubrification de l’équipement de coupe Tension de la chaîneMontage du guide-chaîne et de la chaîne Instructions Générales DE Sécurité / MontageRemplissage de carburant Manipulation DU CarburantCarburant AVERTISSEMENT! N’utilisez jamais une Sécurité carburantTransport et rangement Remisage prolongéDémarrage et arrêt Démarrage ET ArrêtRègles élémentaires de sécurité Techniques DE TravailAvant chaque utilisation Méthodes de travailTerminologie Technique de base pour la coupeGénéralités Toujours travailler à plein régimeTechniques d’abattage Solution à un abattage ratéQu’est-ce qu’un rebond? Mesures anti-rebondFonctionnement EntretienGénéralités Réglage du carburateurBougie SilencieuxFiltre à air Schéma d’entretien Caractéristiques techniques Caractéristiques TechniquesType Guide-chaîne ChaîneVOS Droits ET Obligations EN Garantie AVERTISSEMENT! N’utilisez pas une Précautions à prendre pour se protéger des rebondsAutres consignes de sécurité Ansi B 175.1-2000 Annexe CSímbolos en la máquina IntroduccionApreciado cliente ¿Qué es qué en la motosierra? Índice Emplee siempre el sentido común Instrucciones Generales DE SeguridadMedidas a tomar antes de utilizar una motosierra nueva Importante¡ATENCION! La mayoría de los Equipo de protección personalEquipo de seguridad de la máquina Freno de cadena con protección contra reculadasSistema amortiguador de vibraciones Fiador del aceleradorCaptor de cadena Protección de la mano derechaEquipo de corte reductor de reculadas Equipo de corteReglas básicas Repostaje de aceite para cadena de motosierra Tensado de la cadenaLubricación del equipo de corte Cerrar la manija para fijar el tensadoMontaje de la espada y la cadena Instrucciones Generales DE Seguridad / MontajeSeguridad en el uso del combustible Manipulacion DEL CombustibleCarburante RepostajeArranque y parada Manipulacion DEL Combustible / Arrenque Y ParadaCorte con velocidad de cadena alta, acelerando al máx Tecnica DE TrabajoAntes de utilizar la máquina Reglas básicas de seguridadTécnica de tala Técnica básica de corteTratamiento de una tala fallida Ajuste del carburador MantenimientoGeneralidades Bujía SilenciadorFiltro de aire Programa de mantenimiento Datos técnicos Datos TecnicosEspada Cadena SUS Derechos Y Obligaciones DE Garantia Ansi B 175.1-2000 Anexo C Precauciones de seguridad para usuarios de motosierrasPrecauciones de seguridad en reculadas Otras precauciones de seguridad5451676-63 2008-04-15
Related manuals
Manual 26 pages 62.88 Kb

240e, 235e specifications

The Husqvarna 235E and 240E are two popular models in the world of lightweight chain saws, designed to deliver excellent performance for both novice and experienced users. Ideal for homeowners and professionals alike, these models are perfect for tasks such as cutting firewood, pruning, and handling small trees.

One of the standout features of the Husqvarna 235E and 240E is their lightweight construction. Weighing in at around 10.3 pounds, these chainsaws are easy to maneuver, reducing fatigue during extended use. The ergonomic design enhances comfort, making it easier for users to maintain a firm grip, especially during challenging cutting tasks.

These models are equipped with the powerful X-Torq engine technology, which provides a significant increase in efficiency. The X-Torq engine reduces fuel consumption by up to 20%, allowing users to work longer without the need for frequent refueling. Additionally, the engine's design minimizes harmful emissions, making the 235E and 240E more environmentally friendly.

Another important characteristic is the chainsaw’s emissions control system. Husqvarna has integrated an efficient air filtration system in both models, ensuring that dirt and debris are kept away from the engine for extended periods. This results in less maintenance and longer operational life.

Ease of starting is also a highlight of these models. The Smart Start technology ensures that the chainsaw can be started with minimal effort, allowing users to get to work quickly. The combined choke and stop control further simplify the starting process, ensuring a smooth operation every time.

Safety features are not overlooked in the Husqvarna 235E and 240E. Each model comes with a chain brake that responds quickly to stop the chain in case of kickback, which is essential for preventing accidents during operation. The low-vibration design reduces strain on the hands and arms, fostering a safer and more comfortable user experience.

Overall, the Husqvarna 235E and 240E offer a combination of power, efficiency, and user-friendly features that set them apart in their category. With a focus on performance and safety, these chainsaws are an excellent choice for anyone looking to tackle cutting, trimming, and pruning tasks with ease and confidence. Whether you are a homeowner looking to manage your yard or a professional seeking reliable equipment, the 235E and 240E are worthy contenders.
Top Page Image Contents