Husqvarna 235e, 240e manuel dutilisation Maintenance, Muffler, Air filter, Spark plug

Page 20

MAINTENANCE

Checking the inertia brake release

With the engine turned off, hold the chain saw over a stump or other firm object. Let go of the front handle so that the bar drops towards the stump as the chain saw rotates around the rear handle.

When the bar hits the stump the brake should be applied. (48)

Checking the brake trigger

Place the chain saw on firm ground and start it. Make sure the chain does not touch the ground or any other object. See the instructions under the heading Start and stop.

Grasp the chain saw firmly, wrapping your fingers and thumbs around the handles.

Apply full throttle and activate the chain brake by tilting your left wrist forward onto the front hand guard. Do not let go of the front handle. The chain should stop immediately.

Throttle lockout

•Make sure the throttle control is locked at the idle setting when the throttle lockout is released.

•Press the throttle lockout and make sure it returns to its original position when you release it.

•Check that the throttle control and throttle lockout move freely and that the return springs work properly.

•Start the chain saw and apply full throttle. Release the throttle control and check that the chain stops and remains stationary. If the chain rotates when the throttle control is in the idle position you should check the carburetor idle adjustment.

Chain catcher

Check that the chain catcher is not damaged and is firmly attached to the body of the chain saw.

Right hand guard

Check that the right hand guard is not damaged and that there are no visible defects, such as cracks.

Vibration damping system

Regularly check the vibration damping units for cracks or deformation.

Make sure the vibration damping units are securely attached to the engine unit and handle unit.

Stop switch

Start the engine and make sure the engine stops when you move the stop switch to the stop setting.

Muffler

Never use a machine that has a faulty muffler. Regularly check that the muffler is securely attached to the machine.

Note: The spark arrestor screen (A) on this machine is serviceable. (49) The screen must be replaced if it is damaged. If the screen is blocked the machine will overheat and this will cause damage to the cylinder and piston. Never use a machine with a muffler that is in poor condition. Never use a muffler if the spark arrestor screen is missing or defective.

For normal homeowner use, the muffler and spark arresting screen will not require replacement. After 75 hours of use, we recommend that your muffler be replaced by your authorized Husqvarna service dealer.

Air filter

The air filter must be regularly cleaned to remove dust and dirt in order to avoid:

•Carburettor malfunctions

•Starting problems

•Loss of engine power

•Unnecessary wear to engine parts

•Excessive fuel consumption.

•Remove the air filter (3) after taking off the cylinder cover, screw (1) and filter cover (2).When refitting make sure that the air filter seals tightly against the filter holder. Clean the filter by brushing or shaking it. (50)

The filter can be cleaned more thoroughly by washing it in water and detergent.

An air filter that has been in use for a long time cannot be cleaned completely. The filter must therefore be replaced with a new one at regular intervals. A damaged air filter

must always be replaced.

A HUSQVARNA chain saw can be equipped with different types of air filters according to working conditions, weather, season, etc. Contact your dealer for advice.

Spark plug

The spark plug condition is influenced by:

•Incorrect carburetor adjustment.

•An incorrect fuel mixture (too much or incorrect type of oil).

•A dirty air filter.

These factors cause deposits on the spark plug electrodes, which may result in operating problems and starting difficulties.

If the machine is low on power, difficult to start or runs poorly at idle speed: always check the spark plug first before taking any further action. If the spark plug is dirty, clean it and check that the electrode gap is 0.020 inch (0.5 mm). The spark plug should be replaced after about a month in operation or earlier if necessary.

Note! Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder. Check that the spark plug is fitted with a suppressor.

20 – English

5451676-63 Rev.1 2008-04-14

Page 19 Page 21
Image 20
Page 19 Page 21
Contents 235e 240e 5451676-63 Rev.1 OFF Half Full 49 a Retreat path Symbols on the machine Thank you for using a Husqvarna productIntroduction Dear customerWhat is what on the chain saw? Contents For Canada General Safety PrecautionsBefore using a new chain saw Machine′s safety equipment Always use common sensePersonal protective equipment Chain brake and front hand guardCutting equipment Sharpening your chain and adjusting depth gauge setting General rulesCutting equipment designed to reduce kickback BarTensioning the chain Lubricating cutting equipmentGeneral Safety Precautions / Assembly Happen when the chain touches the operatorFitting the bar and chain Chain drive sprocketFuel safety Fuel HandlingFuel FuelingFuel Handling / Starting and Stopping Starting and stoppingBasic safety rules Working TechniquesBefore use General working instructionsBasic cutting technique Tree felling techniqueFreeing a tree that has fallen badly Working Techniques / Maintenance How to avoid kickbackCarburetor adjustment GeneralMaintenance MufflerAir filter Spark plugMaintenance schedule Daily maintenance Every 5-10 hTechnical Data Technical dataRecommended cutting equipment for Canada Bar ChainFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsAmerican Standard Safety Precautions Safety precautions for chain saw usersKickback safety precautions Other safety precautionsNous vous remercions dutiliser un produit Husqvarna Symboles sur la machineCher client Quels sont les composants de la tronçonneuse? SommaireMesures à prendre avant de mettre en usage une Consignes de sécurité pour les utilisateurs deInstructions Générales DE Sécurité Utilisez toujours votre bon sens Équipement de sécurité de la machineFrein de chaîne avec arceau protecteur AVERTISSEMENT! La plupart desBlocage de l’accélération Capteur de chaîneProtection de la main droite Système anti-vibrationsÉquipement de coupe Règles élémentairesÉquipement de coupe anti-rebond Affûtage et réglage de l’épaisseur du copeau de la chaîneTension de la chaîne Lubrification de l’équipement de coupeInstructions Générales DE Sécurité / Montage Montage du guide-chaîne et de la chaîneRemplissage de carburant Manipulation DU CarburantCarburant Sécurité carburant Transport et rangementRemisage prolongé AVERTISSEMENT! N’utilisez jamais uneDémarrage ET Arrêt Démarrage et arrêtTechniques DE Travail Avant chaque utilisationMéthodes de travail Règles élémentaires de sécuritéTechnique de base pour la coupe GénéralitésToujours travailler à plein régime TerminologieSolution à un abattage raté Techniques d’abattageMesures anti-rebond Qu’est-ce qu’un rebond?Entretien GénéralitésRéglage du carburateur FonctionnementBougie SilencieuxFiltre à air Schéma d’entretien Caractéristiques Techniques Caractéristiques techniquesGuide-chaîne Chaîne TypeVOS Droits ET Obligations EN Garantie Précautions à prendre pour se protéger des rebonds Autres consignes de sécuritéAnsi B 175.1-2000 Annexe C AVERTISSEMENT! N’utilisez pas uneSímbolos en la máquina IntroduccionApreciado cliente ¿Qué es qué en la motosierra? Índice Instrucciones Generales DE Seguridad Medidas a tomar antes de utilizar una motosierra nuevaImportante Emplee siempre el sentido comúnEquipo de protección personal Equipo de seguridad de la máquinaFreno de cadena con protección contra reculadas ¡ATENCION! La mayoría de losFiador del acelerador Captor de cadenaProtección de la mano derecha Sistema amortiguador de vibracionesEquipo de corte reductor de reculadas Equipo de corteReglas básicas Tensado de la cadena Lubricación del equipo de corteCerrar la manija para fijar el tensado Repostaje de aceite para cadena de motosierraInstrucciones Generales DE Seguridad / Montaje Montaje de la espada y la cadenaManipulacion DEL Combustible CarburanteRepostaje Seguridad en el uso del combustibleManipulacion DEL Combustible / Arrenque Y Parada Arranque y paradaTecnica DE Trabajo Antes de utilizar la máquinaReglas básicas de seguridad Corte con velocidad de cadena alta, acelerando al máxTécnica básica de corte Técnica de talaTratamiento de una tala fallida Ajuste del carburador MantenimientoGeneralidades Bujía SilenciadorFiltro de aire Programa de mantenimiento Datos Tecnicos Datos técnicosEspada Cadena SUS Derechos Y Obligaciones DE Garantia Precauciones de seguridad para usuarios de motosierras Precauciones de seguridad en reculadasOtras precauciones de seguridad Ansi B 175.1-2000 Anexo C5451676-63 2008-04-15
Related manuals
Manual 26 pages 62.88 Kb

240e, 235e specifications

The Husqvarna 235E and 240E are two popular models in the world of lightweight chain saws, designed to deliver excellent performance for both novice and experienced users. Ideal for homeowners and professionals alike, these models are perfect for tasks such as cutting firewood, pruning, and handling small trees.

One of the standout features of the Husqvarna 235E and 240E is their lightweight construction. Weighing in at around 10.3 pounds, these chainsaws are easy to maneuver, reducing fatigue during extended use. The ergonomic design enhances comfort, making it easier for users to maintain a firm grip, especially during challenging cutting tasks.

These models are equipped with the powerful X-Torq engine technology, which provides a significant increase in efficiency. The X-Torq engine reduces fuel consumption by up to 20%, allowing users to work longer without the need for frequent refueling. Additionally, the engine's design minimizes harmful emissions, making the 235E and 240E more environmentally friendly.

Another important characteristic is the chainsaw’s emissions control system. Husqvarna has integrated an efficient air filtration system in both models, ensuring that dirt and debris are kept away from the engine for extended periods. This results in less maintenance and longer operational life.

Ease of starting is also a highlight of these models. The Smart Start technology ensures that the chainsaw can be started with minimal effort, allowing users to get to work quickly. The combined choke and stop control further simplify the starting process, ensuring a smooth operation every time.

Safety features are not overlooked in the Husqvarna 235E and 240E. Each model comes with a chain brake that responds quickly to stop the chain in case of kickback, which is essential for preventing accidents during operation. The low-vibration design reduces strain on the hands and arms, fostering a safer and more comfortable user experience.

Overall, the Husqvarna 235E and 240E offer a combination of power, efficiency, and user-friendly features that set them apart in their category. With a focus on performance and safety, these chainsaws are an excellent choice for anyone looking to tackle cutting, trimming, and pruning tasks with ease and confidence. Whether you are a homeowner looking to manage your yard or a professional seeking reliable equipment, the 235E and 240E are worthy contenders.
Top Page Image Contents