![](/images/new-backgrounds/1175454/17545453x1.webp)
Repair Instructions
7.4 Replacing a broken return spring
WARNING!
Exercise care to ensure the spring does not fly out and cause person- al injury. Wear protective goggles.
1
Loosen the screw at the centre of the starter pulley and loosen the screws on the cassette. Remove the starter pulley with the cassette and spring.
2
Remove the broken cassette and replace it with a new one.
3
Tighten the screw at the centre of the starter pulley, at a tightening torque of
7.5 Starter assembly
1
Position the starter against the crankcase and tighten the screws at a tightening torque of
English - 27