Husqvarna 115 13 82-96, 460 Rancher manual Maintenance schedule

Page 39

MAINTENANCE

Maintenance schedule

The following is a list of the maintenance that must be performed on the machine. Most of the items are described in the Maintenance section.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

 

On chain saws without a catalytic

Check the brake band on the chain

 

brake for wear. Replace when less

Clean the outside of the machine.

converter, check the cooling system

than 0.024 inch (0.6 mm) remains at

 

weekly.

 

the most worn point.

 

 

 

 

 

Check that the components of the

Check the starter, starter cord and

Check the clutch centre, clutch drum

throttle control work safely. (Throttle

return spring.

and clutch spring for wear.

lockout and throttle control.)

 

 

 

 

 

Clean the chain brake and check that

 

 

it operates safely. Make sure that the

Check that the vibration damping

Clean the spark plug. Check that the

chain catcher is undamaged, and

elements are not damaged.

electrode gap is 0.020 inch (0.5 mm).

replace it if necessary.

 

 

 

 

 

The bar should be turned daily for

 

 

more even wear. Check the

 

 

lubrication hole in the bar, to be sure it

Lubricate the clutch drum bearing.

Clean the outside of the carburetor.

is not clogged. Clean the bar groove.

 

 

If the bar has a sprocket tip, this

 

 

should be lubricated.

 

 

 

 

 

Check that the bar and chain are

File off any burrs from the edges of

Check fuel hose for cracks or other

getting sufficient oil.

the bar.

damage. Change if necessary.

 

 

 

Check the saw chain with regard to

 

 

visible cracks in the rivets and links,

 

 

whether the saw chain is stiff or

Clean or replace the spark arrestor

Empty the fuel tank and clean the

whether the rivets and links are

screen on the muffler.

inside.

abnormally worn. Replace if

 

 

necessary.

 

 

 

 

 

Sharpen the chain and check its

 

 

tension and condition. Check the drive

Clean the carburetor compartment.

Empty the oil tank and clean the

sprocket for excessive wear and

inside.

 

replace if necessary.

 

 

 

 

 

Clean the starter units air intake.

Clean the air filter. Replace if

Check all cables and connections.

necessary.

 

 

 

 

 

Check that nuts and screws are tight.

 

 

 

 

 

Check that the stop switch works

 

 

correctly.

 

 

 

 

 

Check that there are no fuel leaks

 

 

from the engine, tank or fuel lines.

 

 

 

 

 

On chain saws with a catalytic

 

 

converter, check the cooling system

 

 

daily.

 

 

 

 

 

115 13 82-96 Rev.1 2009-03-26

English – 39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents 455e Rancher Rancher 460 Rancher KEY to Symbols Symbols on the machineSymbols in the operator’s manual EPA You will find the following labels on your chain sawContents Dear customer IntroductionWhat is what on the chain saw? What is WHAT?General Safety Precautions Before using a new chain sawAlways use common sense Machine′s safety equipment Personal protective equipmentChain brake and front hand guard 115 13 82-96 Rev.1 English Vibration damping system Throttle lockoutChain catcher Right hand guardGeneral rules Stop switchCutting equipment MufflerCutting equipment designed to reduce kickback BarChain General information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingTensioning the chain Lubricating cutting equipment 455e RancherFilling with chain oil Checking wear on cutting equipment Checking chain lubricationChain drive sprocket Needle bearing lubricationBar 455e Rancher AssemblyFitting the bar and chain Rancher, 460 RancherAssembly Fuel Fuel HandlingLong-term storage Fuel safetyFueling Transport and storageWarm engine Starting and StoppingStarting and stopping Cold engineStopping General working instructions Basic safety rulesWorking Techniques Before useGeneral rules Terms Basic cutting techniqueLimbing Clearing the trunk and preparing your retreat Tree felling techniqueSafe distance Felling directionFelling cut Directional cutsCutting trees and branches that are in tension General adviceFreeing a tree that has fallen badly Freeing a trapped treeHow to avoid kickback What is kickback?Cutting the trunk into logs Maintenance Carburetor adjustmentGeneral Checking the front hand guard Correctly adjusted carburetorWhen the bar hits the stump the brake should be applied Checking brake band wearImmediately Checking the brake triggerMuffler StarterChanging a broken or worn starter cord Fitting the starter Air filterTensioning the recoil spring Changing a broken recoil springNeedle bearing lubrication Adjustment of the oil pumpSpark plug Lubricating the bar tip sprocketCooling system Air Injection centrifugal cleaningTemperature 0C 32F or colder Temperature -5C 23F or colderDaily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain filing and file gauges Bar and chain combinationsYour Warranty Rights and Obligations Federal Emission Control Warranty StatementOther safety precautions American Standard Safety PrecautionsSafety precautions for chain saw users Kickback safety precautionsAclaracion DE LOS Simbolos Símbolos en la máquinaSímbolos en el manual de instrucciones Etiquetas que se encuentran en la motosierra Índice IndiceApreciado cliente Introduccion¿Qué es qué en la motosierra? ¿QUE ES QUE?Instrucciones Generales DE Seguridad Medidas a tomar antes de utilizar una motosierra nuevaImportante Freno de cadena con protección contra reculadas Emplee siempre el sentido comúnEquipo de protección personal Equipo de seguridad de la máquinaInstrucciones Generales DE Seguridad Captor de cadena Fiador del aceleradorBotón de parada Equipo de corteProtección de la mano derecha Sistema amortiguador de vibracionesCadena Reglas básicasEquipo de corte reductor de reculadas EspadaGeneralidades sobre el afilado de los dientes cortantes Tensado de la cadena Afilado de dientes cortantesGeneralidades sobre el ajuste de la profundidad de corte Rancher Lubricación del equipo de corte Repostaje de aceite para cadena de motosierraControl de la lubricación de la cadena ¡ATENCION! La mayoría de los Piñón de arrastre de la cadenaLubricación del cojinete de agujas Control del desgaste del equipo de corteDeben utilizarse guantes protectores MontajeMontaje de la espada y la cadena ¡ATENCION! Para manipular la cadenaMontaje del apoyo de corteza Carburante Manipulacion DEL CombustibleAlmacenamiento prolongado RepostajeSeguridad en el uso del combustible Transporte y almacenamientoMotor caliente Arranque Y ParadaArranque y parada Motor fríoParada Reglas básicas de seguridad Tecnica DE TrabajoAntes de utilizar la máquina Instrucciones generales de trabajoReglas básicas Designaciones Técnica básica de corteTronzado ¡ATENCION! No intente nunca serrar DesramadoCorte de ramas bajas y camino de retirada Técnica de talaDistancia de seguridad Dirección de derriboCorte de derribo Corte de indicaciónTratamiento de una tala fallida Derribo de un árbol atascadoCorte de árboles y ramas tensos ¡ATENCION! Las reculadas pueden ser Medidas preventivas de las reculadas¿Qué es la reculada? ¡No corte nunca del todo un objeto en tensiónMantenimiento GeneralidadesAjuste del carburador Control de la protección contra reculadas Surtidor de pleno régimen HCarburador correctamente regulado Control del desgaste de la cinta de frenoDetenerse inmediatamente Control de la función de inerciaSilenciador Cambio de un muelle de retorno roto Mecanismo de arranqueCambio de un cordón de arranque roto o desgastado Tensado del muelle de retornoMontaje del mecanismo de arranque Filtro de aireBujía Engrase del cabezal de rueda de la espadaDepuración centrífuga Air Injection Lubricación del cojinete de agujasAjuste de la bomba de aceite Sistema refrigeranteUtilización en invierno Temperaturas de 0C o más fríasTemperaturas de -5C 23F o inferiores Programa de mantenimiento Datos técnicos Datos TecnicosDe arrastre unidad Combinaciones de espada y cadenaAfilado y calibres de afilado de la cadena de sierra Pulgadas Pulgadas/mmSUS Derechos Y Obligaciones DE Garantia Garantia DEL Sistema DE Control DE EmisionesOtras precauciones de seguridad Precauciones DE Seguridad DE LA Norma AmericanaPrecauciones de seguridad para usuarios de motosierras Precauciones de seguridad en reculadas115 13 82-96 Rev.1 115 13 82-96 Rev.1 115 13 82-96 Rev.1 ´z+SF=¶6*¨ 115 13 82-96 Rev.1 1151382-96

115 13 82-96, 460 Rancher specifications

The Husqvarna 115 13 82-96,460 Rancher is a powerful and versatile chainsaw designed to meet the needs of both homeowners and professionals. This model is particularly well-suited for those who require a reliable tool for light to medium-duty applications, such as tree trimming, pruning, and firewood cutting.

One of the standout features of the 460 Rancher is its impressive 60.3cc X-Torq engine. This engine delivers excellent power while ensuring optimal fuel efficiency and reduced emissions. The X-Torq technology minimizes fuel consumption by up to 20% compared to standard engine designs, making this chainsaw environmentally friendly and cost-effective to operate.

The 460 Rancher is equipped with a durable 18-inch guide bar, allowing for a deeper cutting capacity. Coupled with a high-performance chain, it provides smooth cutting performance through various types of wood. The chainsaw’s automatic oiling system ensures that the bar and chain receive adequate lubrication while in use, extending the lifespan of components and improving performance.

User comfort and ease of use are further enhanced by the lightweight design and ergonomic handle. The front handle features an anti-vibration system that reduces fatigue during extended use, allowing operators to work for longer periods without discomfort. Moreover, the chainsaw includes a quick-release air filter that simplifies maintenance, making it easy to keep the tool in top working condition.

Another notable technology in the 460 Rancher is the Smart Start system, which allows the chainsaw to start with minimal effort. This feature is particularly beneficial for users who may not be as experienced with starting a chainsaw, making the tool accessible to a wider audience.

Safety features are also a priority with the Husqvarna 460 Rancher. It comes with a chain brake that automatically activates in the event of kickback, providing an additional layer of protection for the user. The chainsaw is also designed with a throttle lockout, preventing accidental throttle engagement.

Overall, the Husqvarna 115 13 82-96,460 Rancher is an exceptional chainsaw that combines power, efficiency, and user-friendly features. Whether for cutting firewood, tackling yard work, or handling forest jobs, this model stands out as a reliable and effective tool in the Husqvarna lineup.
Top Page Image Contents