Husqvarna SG13A / CE, 968999239 manual Safety Instructions

Page 8

SAFETY INSTRUCTIONS

Follow all safety instructions. Failure to do so may result in injury to yourself or others.

Accident prevention regulations, other general safety regulations, occupational safety rules and traffic regulations must be followed without fail.

All users shall be trained in use of the machine. The owner is responsible for training users.

Engage an authorized Husqvarna workshop for all service and repairs not described in this manual.

Husqvarna original spare parts are designed and specified to maintain high quality and correct fit for optimal durability and life-span. From a safety point of view, you should only use Husqvarna original spare parts.

Learn how to use the machine and its controls safely and learn to recognize the safety decals.

Only use the machine for removing tree stumps. It is not intended for any other use.

Check that the machine is in serviceable condition prior to use; see the chapter ”Maintenance/Maintenance schedule”.

Only use the machine in daylight or in other well- lit conditions. Keep the machine a safe distance from holes or other irregularities in the ground. Pay attention to other possible risks.

Only allow the machine to be used by adults who are familiar with its use.

Never allow children or persons not trained in the use of the machine to use or service it. Local laws may regulate the age of the user.

People and animals can distract you causing you to lose control of the machine. For this reason, you should always concentrate and focus on the task at hand.

Never leave the machine unsupervised with the engine running.

Make sure that other people are nearby when you are using the machine so that you can call for help should an emergency arise.

The machine is tested and approved only with the equipment originally provided or recommended by the manufacturer.

WARNING!

The engine can become very hot. To avoid being burned, you must turn off the engine and wait until all parts have cooled before touching the engine.

WARNING!

Overexposure to vibration may lead to circulatory or nerve damage, particularly in people who have impaired circulation. Contact your doctor if you experience symptoms that could have been caused by overexposure to vibration. Examples of common symptoms include numbness, pain, muscle weakness, change of skin color or an uncomfortable feeling of tingling. These symptoms appear most frequently in the fingers, hands or wrists.

IMPORTANT INFORMATION

Never use a stump grinder that is damaged or incorrectly adjusted. Never use the stump grinder if any component is missing or if it is not properly assembled. Check that the cutting tools stop rotating when you reduce the throttle. If you find yourself in a situation where you are not sure what to do, always seek expert assistance. DO NOT try to attack any problem you are not qualified to resolve.

8

Image 8
Contents Operator’s Manual Model 968999239 Manual no REV 03/08/04Husqvarna All Rights Reserved Printed Beatrice, Nebraska Table of Contents Introduction Symbols and Decals Decals and machine-bound instructionsDecal Location of decals Translation of instructionsDecal Important information Safety Instructions General useSafety Instructions Preparations Operating Children Movement/TransportStorage Fuel system Maintenance Protective Equipment Personal equipmentSET-UP Equipment set-upHair PIN Engine Main components and operating controls ControlsPresentation 12 11 EngineThrottle Starter Starter handleFuel valve Choke controlSpark plug MufflerOil dipstick Oil drainageFuel tank FuelingCentrifugal clutch Dead man’s grip barOn/Off Engine switch on the panel Adjustment bar for the handleBrake Never operate a machine with a defective brakeOperation Starting the engineStarter handle Engine switch on the handleDead man’s grip bar Engine switch Normal shutdownShutdown in emergency situations BrakeBefore you start Using your stump grinder 8011-202chg Transport Shut off the machine when you are doneOperating on hills Maintenance Maintenance scheduleCleaning the cyclone filter Replacing the air filter Cleaning the sludge reservoir Idle adjustmentIgnition system Fitting the wrong spark plug type can damage the engineAdjusting the drive belt Disassembling and reassembling the blade, pockets and teeth Removing and refitting the wheels Two minute rule Adjusting the brakeCleaning and washing Lubrication Blade shaft bearingsEngine oil Checking the engine’s oil levelRight wheel Throttle cableTroubleshooting Symptom Cause ActionProblem Possible solutions Winter storage ServiceStorage Technical Data ModelWiring Diagram Service Journal Delivery serviceService Journal