Ryobi Outdoor CS30, SS30, BC30 manual Fuel CAP, Spark Plug, Storage 1 Month or Longer

Page 22

MAINTENANCE

FUEL CAP

WARNING:

A leaking fuel cap is a fire hazard and must be replaced immediately.

The fuel cap contains a non-serviceable filter and a check valve. A clogged fuel filter will cause poor engine perfor- mance. If performance improves when the fuel cap is loos- ened, check valve may be faulty or filter clogged. Replace fuel cap if required.

SPARK PLUG

This engine uses a Champion RCJ-6Y or NGK BPMR7A spark plug with 0,63 mm (.025 in.) electrode gap. Use an exact replacement and replace annually.

STORAGE (1 MONTH OR LONGER)

1.Drain all fuel from tank into a container approved for gasoline. Run engine until it stops.

2.Clean all foreign material from the trimmer. Store it in a well-ventilated place that is inaccessible to children.Keep away from corrosive agents such as garden chemicals and de-icing salts.

3.Abide by all ISO and local regulations for the safe storage and handling of gasoline. Excess fuel should be used up in other 2-cycle engine powered equipment.

Page 22

Image 22

Contents Operators Manual Table of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules for Trimmer USE Specific Safety RulesSpecific Safety Rules for BRUSHCUT- TER and Blade USE Symbols Symbol Name ExplanationService Symbol Signal MeaningSpecifications UnpackingFeatures CS30 RY30020, RY30023SS30 RY30040, RY30043 Removing the Attachment from the Power Head AssemblyAttaching the Power Head to the Attachment Attaching the Storage HangerAttaching the Front Handle CS30 and SS30 Attaching the J Barrier Handle BC30To Attach the Curved Shaft Grass Deflector CS30 Attaching the Grass DeflectorAttaching the Brushcutter Guard BC30 To Attach the Straight Shaft Grass Deflector SS30Removing the TRI-ARC Blade Brushcutter Guard Attaching the Shoulder Harness BC30Converting from Brushcutter to String Trimmer BC30 See Figures 10Converting from String Trimmer to Brushcutter BC30 Installing the TRI-ARC Blade Brushcutter GuardRemoving the Straight Shaft Grass Deflector and String Head Fueling and Refueling the Trimmer OperationOperating the Trimmer Cutting Tips To Advance the Cutting LineTo Advance the Cutting Line Manually See Figures 16TRI-ARC Blade Operating the BrushcutterBlade Thrust Cutting Technique BladeTo Start a Cold Engine Starting and StoppingSee Figures 21 To Stop the EngineNEW Prewound Spool MaintenanceSpool Replacement See Figures 24String Replacement See Figures 26Replacing and Cleaning AIR Filter Cleaning the Exhaust Port and Muffler Spark ArrestorSee Figures 29 Spark Plug Fuel CAPStorage 1 Month or Longer Troubleshooting Problem Possible Cause SolutionCall Warranty Manufacturers Warranty CoveragePage Emissions Maintenance Schedule and Warranted Parts List Service