Ryobi Outdoor CS30, SS30, BC30 manual Call

Page 24

TROUBLESHOOTING

IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM CONTACT YOUR AUTHORIZED SERVICE DEALER.

 

PROBLEM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

 

 

Spool retainer hard to turn:

1.

Screw threads are dirty or

1.

Clean threads and lubricate with grease - if no

 

 

 

damaged.

 

improvement, replace the spool retainer.

 

 

 

 

 

 

Grass wraps around

1.

Cutting tall grass at ground level.

1.

Cut tall grass from the top down to prevent

driveshaft housing and string

 

 

 

wrapping.

head:

2.

Operating trimmer at part

2.

Operate trimmer at full throttle.

 

 

 

throttle.

 

 

 

 

 

 

 

 

 

 

 

CALL

4050

 

 

 

 

-

 

860

 

-

 

800

 

-

 

 

1

 

 

CALL US FIRST

For any questions about operating or maintaining your trimmer, or brushcutter

call the Ryobi® Help Line !

Your trimmer has been fully tested prior to shipment to ensure

your complete satisfaction.

Page 24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Operators Manual Table of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules for Trimmer USESpecific Safety Rules for BRUSHCUT- TER and Blade USE Symbols Symbol Name ExplanationService Symbol Signal MeaningSpecifications UnpackingFeatures CS30 RY30020, RY30023SS30 RY30040, RY30043 Assembly Attaching the Power Head to the AttachmentRemoving the Attachment from the Power Head Attaching the Storage HangerAttaching the Front Handle CS30 and SS30 Attaching the J Barrier Handle BC30Attaching the Grass Deflector Attaching the Brushcutter Guard BC30To Attach the Curved Shaft Grass Deflector CS30 To Attach the Straight Shaft Grass Deflector SS30Attaching the Shoulder Harness BC30 Converting from Brushcutter to String Trimmer BC30Removing the TRI-ARC Blade Brushcutter Guard See Figures 10Installing the TRI-ARC Blade Brushcutter Guard Converting from String Trimmer to Brushcutter BC30Removing the Straight Shaft Grass Deflector and String Head Operation Fueling and Refueling the TrimmerOperating the Trimmer To Advance the Cutting Line To Advance the Cutting Line ManuallyCutting Tips See Figures 16Operating the Brushcutter Blade ThrustTRI-ARC Blade Cutting Technique BladeStarting and Stopping See Figures 21To Start a Cold Engine To Stop the EngineMaintenance Spool ReplacementNEW Prewound Spool See Figures 24String Replacement See Figures 26Cleaning the Exhaust Port and Muffler Spark Arrestor Replacing and Cleaning AIR FilterSee Figures 29 Fuel CAP Spark PlugStorage 1 Month or Longer Troubleshooting Problem Possible Cause SolutionCall Warranty Manufacturers Warranty CoveragePage Emissions Maintenance Schedule and Warranted Parts List Service
Top Page Image Contents