Ryobi P2005 Call Us First, Troubleshooting, call the Ryobi Help Line, your complete satisfaction

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

String will not advance when using the auto-feed head:

String is welded to itself.	Lubricate with silicone spray.
Not enough string on spool.	Installmorestring.RefertoStringReplacement
	earlier in this manual.
String is worn too short.	Pull string while pressing button.
String is tangled on spool.	Remove string from spool and rewind. Refer
	to String Replacement earlier in this manual.

Grass wraps around boom	Cutting tall grass at ground
housing and string head	level.

Cut tall grass from the top down to prevent wrapping.

Motor fails to start when switch	Battery is not secure.	To secure the battery pack, make sure the
trigger is depressed.		latches on each side of the battery pack snap
		into place.
	Battery is not charged.	Charge the battery pack according to the
		instructions included with your model.

CALL US FIRST

For any questions about operating or maintaining your product,

call the Ryobi® Help Line!

Your product has been fully tested prior to shipment to ensure

your complete satisfaction.

10 — English