16.To make installation easier, submerge handle grips into warm soapy water. Remove handle grips from soapy water and slide onto handles.
17. Squeeze snap button (12), slide into handle, and |
|
|
|
| 12 |
| |
release snap button through second hole. |
|
| |
|
|
| |
|
|
| |
NOTE: V of snap button is inserted first. Repeat |
|
|
|
step on other handle. |
|
|
|
18.Depress snap button (12), slide into handle
bracket, and release through first slot in handle bracket as shown. Secure handle to handle bracket with screw (6) and locknut.
19.On other handle depress snap button (12), slide into handle bracket, and release through first slot in handle bracket as shown. Secure handle to handle bracket with screw (6) and locknut.
20.Attach handle bracket assemblies to frame with screws and locknuts (7). Tighten securely.
12
6
12 6
12
7
NOTE: Orientation of handle assemblies to frame will depend on how the operator wishes to operate snap button (12). If snap button is assembled to outside of the generator frame it will be operated by the fingers. If snap button is assembled to inside of the generator frame it will be operated by the thumbs. The figure shows the snap button assembled to inside of generator frame.
Risk of moving parts. Keep fingers away from
all moving parts. Contact with moving parts can result in serious injury. Keep children away from the generator at all times. They may not be able to recognize the hazards of this product.
21.The portability kit is now ready for use.
22.To lower handle, depress snap button and fold handles down.
23.Raise handles and allow snap button to snap into place.
11- ENG | A01296 |