Remington Power Tools BS188A, BPS188A, BS188A owner manual Non-Warranty Service

Page 19

STORAGE

If storing saw for more than 30 days, follow steps below.

1.Remove battery from chain saw.

2.Charge battery completely. Note: It could take up to 9 hours to complete- ly charge the battery.

3.When battery is completely charged, remove from charger and put protec- tive cap on battery terminals.

Important: To prolong battery life, avoid leaving battery on charger for extended periods of time (over 30 days without use).

4.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.

5.Dry guide bar and chain.

6.Place chain in container filled with oil. This will prevent rust.

7.Wipe a thin coating of oil over sur- face of guide bar.

8.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.

9.Store chain saw and battery

•in a high or locked place, out of chil- dren’s reach

•in a dry place

•in a carrying case or with scabbard over guide bar

TECHNICAL SERVICE

You may have further questions about as- sembling, operating, or maintaining this product. If so, you can visit our Technical Service web site at www.desatech.com or contact our Technical Service Department at 1-800-626-2237 (English Only). You may also write to:

DESA Power Tools P.O. Box 90004

Bowling Green, KY 42102-9004 ATTN: Technical Service

When contacting DESA Power Tools, have ready:

•Your Name

•Your Address

•Your Phone Number

•Model Number of Product

•Date of Purchase (Include copy of re- ceipt for written requests).

REPLACEMENT PARTS AND ACCESSORIES

WARNING: Use only replace- ment parts and accessories de- scribed in this manual. Use of other parts or accessories could damage saw or injure operator.

For original replacement parts and acces- sories, contact your nearest Authorized Dealer or Authorized Service Center for this product. If they can not supply the part or accessory, contact your nearest Parts Central listed on page 45 . Each Authorized Dealer, Authorized Service Center, and Parts Central is independently owned and operated. You may also order parts from the "Online Outlet" at www.desatech.com.

See pages 43 through 44 for an Illustrated Parts List.

If you need additional referral information, contact our Technical Service Department (see Technical Service).

REPAIR SERVICE

Note: Only use original replacement parts. This will protect your warranty coverage for parts replaced under warranty.

Warranty Service

If product requires warranty service, return it to nearest Authorized Service Center. You must show proof of purchase. If faulty materials or workmanship caused damage, we will repair or replace product without charge. Note: Normal wear, misuse, abuse, neglect, or accidental damage is not covered under warranty.

Non-Warranty Service

If product requires service, return it to nearest Authorized Service Center. Repairs will be billed to you at regular repair list prices.

For additional Service Center or warranty information, call 1-800-626-2237 or visit our Technical Service web site at www. desatech.com.

We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard written warranty. We make no other warranty, expressed or implied.

BATTERY DISPOSAL AND RECYCLING

This product uses nickel-cadnium bateries. Local, state, or federal laws may prohibit disposal of nickel-cadnium batteries in the ordinary trash.

To help protect the environment and con- serve natural resources, please dispose of batteries properly. You may contact your local recycling center for information on where to drop off the batteries.

ENGLISH

www.desatech.com

19

ww.desatech.com

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Volt Cordless Chainsaw Stop Introduction ContentsBefore Operating Saw Important Safety InformationWhile Operating Saw Maintenance Storage of Saw IMPORTANT Safety InformationKickback Storage Polesaw Trimming PrecautionsGeneral Maintenance ServiceChain Saw Product IdentificationPoleSaw Bar that reduces chance of kickback Chain SAW terms and definitionsRear Handle Handle located at rear of saw body Reduced Kickback Guide Bar Guide10.0 Rechargeable batteryProtective Battery Terminal Cap Safety WarningsImportant Charging Notes Charging BatteryChain Saw Information Chain Saw AssemblySaw Chain Tension Adjustment Loosen guide bar nuts before adjust- ing chain see FigureBefore Felling a Tree Oiling ChainFelling a Tree Cutting Down a Tree Cutting with the Chain SawCut towards notch Felling Procedure Felling NotchLimbing a Tree Felling CutEntire Length Of Log On Ground Bucking a LogTrimming a Tree Pruning Log Supported On One EndCutting with the Polesaw Polesaw AssemblyAdjusting Pole Length Polesaw InformationSharpening Saw Chain Cleaning and MaintenanceCleaning Saw Body Care of Guide BarFiling Cutter Depth Gauges Replacing Saw ChainPlace sprocket cover onto guide bar bolts Observed Fault Possible Cause Remedy TroubleshootingNon-Warranty Service Warranty ServiceSee pages 43 through 44 for an Illustrated Parts List Box Warranty InformationManual Para EL Usuario Información sobre la sierra de cadena Diagnóstico Y Resolución DE ProblemasIntroducción Entificación del ProductoAntes DE Utilizar LA Sierra Información Importante DE SeguridadAl utilizar la sierra Al cortar, no aplique gra fuerza a la sierra ContragolpesCómo llevar la sierra Mantenimiento General AlmacenamientoMantenimiento de la cadena y seguridad contra contragolpes Inspeccione la cadena serrada antes y después de cada usoPrecauciones al recortar con la sierra de pértiga DesembalajePoleSaw Cadena Identificación del ProductoTérminos y definiciones de la sierra de cadena Cord AWG Cord Batería recargableTapa protectora del terminal de la batería Advertencias de SeguridadNotas importantes sobre la carga Carga de la bateríaTensión de la sierra de cadena Ensamblado de la sierra de cadenaLubricación DE LA Cadena Ajuste DE Tensión DE LA Cadena SerradaRealización DE Cortes Procedimiento de tala Corte de la muesca Tala DE UN Árbol Derribamiento de un árbolAdvertencia Antes de derribar un árbolTronco apoyado en un extremo Desmembramiento DE UN ÁrbolTrozado DE UN Tronco La totalidad del tronco sobre el sueloFigura 20- Poda de una rama Poda DE UN ÁrbolInformación sobre la sierra de Pértiga Corté CON LA Sierra DE Pértiga Regulación DE LA Longitud DE LA PértigaAfilado DE LA Cadena Limpieza Y MantenimientoLimpieza DEL Cabezal Cuidado DE LA Barra DE GuíaLimado de los calibradores de medida de profundidad Recambio de la cadena serradaAjuste bien la barra guía con la llave Diagnóstico Y Resolución DE Problemas Servicio con garantía Servicio TécnicoAccesorios Y Piezas DE Repuesto Servicio DE ReparaciónGarantía Estándar de la Batería Garantía EstándarGarantía Limitada Illustrated Parts LIST/DESGLOSE Ilustrado DE Partes BS188A Parts LIST/LISTA DE RepuestosParts Centrals / Central DE Piesaz 121071-01 REV.A 11/07

BS188A, BPS188A, BS188A, BPS188A, BS188A specifications

Remington Power Tools has established a reputation for manufacturing high-quality equipment that meets the needs of both professional tradespeople and DIY enthusiasts. Among their wide array of tools, the BS188A and BPS188A models stand out as versatile and reliable options for various tasks.

The BS188A is a powerful and efficient tool designed for heavy-duty job applications. It features a robust motor that provides exceptional performance, ensuring that it can handle even the toughest materials with ease. The lightweight design allows for extended usage without causing fatigue, making it suitable for a wide range of tasks, from woodworking to metalworking.

One of the standout features of the BS188A is its variable speed control, which provides users the flexibility to adjust the tool's speed according to the specific requirements of their project. This feature enhances precision and ensures that users can achieve the desired results consistently. Additionally, the tool comes with an ergonomic handle that provides a comfortable grip, reducing strain during operation.

The BPS188A model complements the BS188A by offering added versatility with a broader range of applications. It includes advanced technology such as an automatic feed system that enables users to work more efficiently, minimizing downtime between tasks. This feature streamlines workflows, making it easier to tackle larger projects without interruptions.

Another notable characteristic of the BPS188A is its high-capacity battery, which ensures longer run times and faster charging. This provides an added layer of convenience, as users can work longer hours without worrying about running out of power. Furthermore, the inclusion of LED indicators helps to keep track of battery life, allowing users to recharge when necessary.

Both models also prioritize user safety, incorporating features such as overload protection and a quick-stop function. These safety measures are crucial in preventing accidents and ensuring that users can operate the tools with confidence, regardless of their experience level.

In summary, the Remington Power Tools BS188A and BPS188A models combine performance, versatility, and safety. With their powerful motors, ergonomic designs, and advanced features, these tools are perfect for anyone looking to enhance their productivity and tackle various projects with ease. Whether for professional use or personal projects, these tools deliver reliability and efficiency.
Top Page Image Contents