Remington Power Tools BS188A, BPS188A, BS188A Rechargeable battery, Safety Warnings, 10.0

Page 9

Rechargeable battery

Protective Battery Terminal Cap

WARNING: Do not store or carry battery so that metal objects can contact exposed battery ter- minals. For example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc. with loose nails, screws, keys, jewelry etc. without battery cap.

A protective battery terminal cap is provided for use whenever the battery is out of the tool or charger. Remove cap before placing battery in charger or tool.

Safety Warnings

1.This manual contains important safe- ty and operating instructions.

2.Before using battery charger, read all instructions and cautionary markings on battery charger, battery pack, and product using battery pack.

CAUTION: To reduce the risk of injury, charge only Remington brand batteries. Other types of bat- teries may burst causing personal injury and damage.

3.Do not expose charger to rain or snow.

4.Use of an attachment not recommended or sold by Remington brand may result in a risk of fire, electric shock, or injury to persons.

5.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

6.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could re- sult in a risk of fire, electric shock or electrocution.

a.Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed extension cords should be used, and we recommend that they be listed by Underwriters Laboratories (U.L.). If the extension is to be used outside, the cord must be suitable for outdoor use. Any cord marked for outdoor use can also be used for indoor work. The letters “W” or “WA” on the cord jacket indicate that the cord is suitable for outdoor use.

b.An extension cord must have ad- equate wire size (AWG or American Wire Gauge) for safety, and to pre- vent loss of power and overheating. The smaller the gauge number of the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each exten- sion contains at least the minimum wire size.

CHART FOR MINIMUM WIRE SIZE (AWG) OF EXTENSION CORDS NAMEPLATE RATING AMPS – 0

– 10.0

Cord

AWG Cord

Length

Size

 

 

25 feet

18 AWG

 

 

50 feet

18 AWG

 

 

100 feet

16 AWG

 

 

150 feet

14 AWG

 

 

7. Use only the supplied charger (P/

N 121397-01)when charging. The use of any other charger could dam- age the battery or create a hazardous condition.

8.Use only one charger when charging.

9.Use only Remington RB18V OR RBE18V battery packs with this product.

10.Do not attempt to open the charger. There are no customer serviceable parts inside. If damaged, call DESA Power Tools Technical Service.

11.DO NOT incinerate the battery pack even if they are severely damaged or completely worn out. The batteries can explode in a fire.

12.A small leakage of liquid from the battery pack cells may occur under extreme usage, charging, or tempera- ture conditions. This does not indicate a failure. However, if the outer seal is broken and this leakage gets on your skin:

• Wash quickly with soap and water.

• Neutralize with a mild acid such as lemon juice or vinegar.

• If the battery liquid gets in your eyes, fush them with clean water for a minimum of 10 minutes and seek immediate medical attention.

MEDICAL NOTE: The liquid is a 25-35% solution of potassium hydroxide.

ENGLISH

www.desatech.com

ww.desatech.com

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Volt Cordless Chainsaw Stop Introduction ContentsImportant Safety Information Before Operating SawWhile Operating Saw IMPORTANT Safety Information Maintenance Storage of SawKickback General Maintenance Polesaw Trimming PrecautionsService StorageProduct Identification Chain SawPoleSaw Rear Handle Handle located at rear of saw body Chain SAW terms and definitionsReduced Kickback Guide Bar Guide Bar that reduces chance of kickbackProtective Battery Terminal Cap Rechargeable batterySafety Warnings 10.0Important Charging Notes Charging BatterySaw Chain Tension Adjustment Chain Saw AssemblyLoosen guide bar nuts before adjust- ing chain see Figure Chain Saw InformationFelling a Tree Cutting Down a Tree Oiling ChainCutting with the Chain Saw Before Felling a TreeLimbing a Tree Felling Procedure Felling NotchFelling Cut Cut towards notchTrimming a Tree Pruning Bucking a LogLog Supported On One End Entire Length Of Log On GroundAdjusting Pole Length Polesaw AssemblyPolesaw Information Cutting with the PolesawCleaning Saw Body Cleaning and MaintenanceCare of Guide Bar Sharpening Saw ChainReplacing Saw Chain Filing Cutter Depth GaugesPlace sprocket cover onto guide bar bolts Observed Fault Possible Cause Remedy TroubleshootingWarranty Service Non-Warranty ServiceSee pages 43 through 44 for an Illustrated Parts List Box Warranty InformationManual Para EL Usuario Introducción Diagnóstico Y Resolución DE ProblemasEntificación del Producto Información sobre la sierra de cadenaInformación Importante DE Seguridad Antes DE Utilizar LA SierraAl utilizar la sierra Contragolpes Al cortar, no aplique gra fuerza a la sierraCómo llevar la sierra Mantenimiento de la cadena y seguridad contra contragolpes AlmacenamientoInspeccione la cadena serrada antes y después de cada uso Mantenimiento GeneralPrecauciones al recortar con la sierra de pértiga DesembalajePoleSaw Cadena Identificación del ProductoTérminos y definiciones de la sierra de cadena Tapa protectora del terminal de la batería Batería recargableAdvertencias de Seguridad Cord AWG CordNotas importantes sobre la carga Carga de la bateríaTensión de la sierra de cadena Ensamblado de la sierra de cadenaAjuste DE Tensión DE LA Cadena Serrada Lubricación DE LA CadenaRealización DE Cortes Advertencia Tala DE UN Árbol Derribamiento de un árbolAntes de derribar un árbol Procedimiento de tala Corte de la muescaTrozado DE UN Tronco Desmembramiento DE UN ÁrbolLa totalidad del tronco sobre el suelo Tronco apoyado en un extremoFigura 20- Poda de una rama Poda DE UN ÁrbolInformación sobre la sierra de Pértiga Corté CON LA Sierra DE Pértiga Regulación DE LA Longitud DE LA PértigaLimpieza DEL Cabezal Limpieza Y MantenimientoCuidado DE LA Barra DE Guía Afilado DE LA CadenaRecambio de la cadena serrada Limado de los calibradores de medida de profundidadAjuste bien la barra guía con la llave Diagnóstico Y Resolución DE Problemas Accesorios Y Piezas DE Repuesto Servicio TécnicoServicio DE Reparación Servicio con garantíaGarantía Estándar Garantía Estándar de la BateríaGarantía Limitada Illustrated Parts LIST/DESGLOSE Ilustrado DE Partes BS188A Parts LIST/LISTA DE RepuestosParts Centrals / Central DE Piesaz 121071-01 REV.A 11/07

BS188A, BPS188A, BS188A, BPS188A, BS188A specifications

Remington Power Tools has established a reputation for manufacturing high-quality equipment that meets the needs of both professional tradespeople and DIY enthusiasts. Among their wide array of tools, the BS188A and BPS188A models stand out as versatile and reliable options for various tasks.

The BS188A is a powerful and efficient tool designed for heavy-duty job applications. It features a robust motor that provides exceptional performance, ensuring that it can handle even the toughest materials with ease. The lightweight design allows for extended usage without causing fatigue, making it suitable for a wide range of tasks, from woodworking to metalworking.

One of the standout features of the BS188A is its variable speed control, which provides users the flexibility to adjust the tool's speed according to the specific requirements of their project. This feature enhances precision and ensures that users can achieve the desired results consistently. Additionally, the tool comes with an ergonomic handle that provides a comfortable grip, reducing strain during operation.

The BPS188A model complements the BS188A by offering added versatility with a broader range of applications. It includes advanced technology such as an automatic feed system that enables users to work more efficiently, minimizing downtime between tasks. This feature streamlines workflows, making it easier to tackle larger projects without interruptions.

Another notable characteristic of the BPS188A is its high-capacity battery, which ensures longer run times and faster charging. This provides an added layer of convenience, as users can work longer hours without worrying about running out of power. Furthermore, the inclusion of LED indicators helps to keep track of battery life, allowing users to recharge when necessary.

Both models also prioritize user safety, incorporating features such as overload protection and a quick-stop function. These safety measures are crucial in preventing accidents and ensuring that users can operate the tools with confidence, regardless of their experience level.

In summary, the Remington Power Tools BS188A and BPS188A models combine performance, versatility, and safety. With their powerful motors, ergonomic designs, and advanced features, these tools are perfect for anyone looking to enhance their productivity and tackle various projects with ease. Whether for professional use or personal projects, these tools deliver reliability and efficiency.
Top Page Image Contents